specifications for LSD rebuild
11-30-2004, 06:11 PM
Post: #1
specifications for LSD rebuild
does any one know the tolerances for the thickness of the clutch plates acording to the toyota workshop manual?
has anybody measured the thickness of the t3 plates?
anybody know any body who has modified a plate type LSD?
are we talking adding shims in mm or 0.00mm?

could someone try and email g.tyler at T3 to find out (he ignores me)!!

so many questions!! thanks in advance for any info/links etc

when i get all the answers i will take photos write up story and post1

old post

hi guys just wondering if anyone has rebuilt their LSD here using the T3 rebuild kit. the parts are availible from toyota but the thrust washers come in different thicknesses does anyone know what tickness the T3 part are or they just the thickest ones availible?
are the tolerances between the plates that important if you want it to be uprated (ie harsher locking action)?

if anyone can help it would be much apreciated as i know many of you are undertaking the same job!

Run Free and take a Goodline

V8FOURCAM32 MK3 Supra
Patchwork AE86 from 4AGE to 7AGE to 4AGZE and now 4AGEU20v
suzuki cappuccino
mondeo TD
Find all posts by this user
11-30-2004, 06:30 PM
Post: #2
specifications for LSD rebuild
I want to rebuild my lsd as well, I'm on the waitinglist for the T3 rebuild kit, but it's taking a long time. I thought they had thicker clutch plates and not thicker thrust washers. I dont know any more about it, but I would like to learn more..so if anyone has experience rebuilding these, share!

FABRICA MI DIEM, PVNC!
Visit this user's website Find all posts by this user
11-30-2004, 11:22 PM
Post: #3
specifications for LSD rebuild
Recent mail from gabe tyler.
> From: Gabriel Tyler [mailto:[email protected]]
> Sent: Monday, November 15, 2004 9:09 PM
> To: Ivica "Petrović
> Subject: RE: Parts request from Ivica Petrovic (for a AE86)
>
> I should have the rewinds in 3 weeks or so, but I have no ETA
> on the LSD rebuild kits.
>
>
> =====
> Gabriel Tyler
> http://www.TechnoToyTuning.com

Drifting - best fun you can have in your car with your pants on!
Visit this user's website Find all posts by this user
12-02-2004, 01:03 PM
Post: #4
specifications for LSD rebuild
i have just ordered the thickest ones after speaking to an LSD specialist (convieniently there is one near where i live) he said to improve the action of the diff (ie make it tighter) to just order the thckest plates so i did
(from toyota)
i will keep posting on progress!

Run Free and take a Goodline

V8FOURCAM32 MK3 Supra
Patchwork AE86 from 4AGE to 7AGE to 4AGZE and now 4AGEU20v
suzuki cappuccino
mondeo TD
Find all posts by this user
12-02-2004, 05:04 PM
Post: #5
specifications for LSD rebuild
H7ERO please also specify the cost etc i would like to know the rest about LSD i got one from my car and swaped them around some but i'd like to know the progress

Cars:
"99 Lexus IS200
"86 AE86 Kouki Panda Levin GT-Apex (restore project)
"84 AE86 Zenki Blue Levin (project racer)
Motorcycles:
"02 Yamaha R1
"02 Honda Hornet S
"08 BMW R1200GS
Find all posts by this user
12-03-2004, 02:58 PM
Post: #6
specifications for LSD rebuild
ok so far the cost is about 100 euros for two clutch plates and 2 spline plates, 2 adjusting washers (#6 the thickest ones), 4 springs and the differential housing gasket i will keep you posted

Run Free and take a Goodline

V8FOURCAM32 MK3 Supra
Patchwork AE86 from 4AGE to 7AGE to 4AGZE and now 4AGEU20v
suzuki cappuccino
mondeo TD
Find all posts by this user
12-03-2004, 03:55 PM
Post: #7
specifications for LSD rebuild
Take some pics while your at it, we could really do with a write-up of our own. Even I can take an lsd apart and put it back together in the right order, but the whole clearance/backlash stuff that comes with it is something I dont understand very well.

FABRICA MI DIEM, PVNC!
Visit this user's website Find all posts by this user
12-04-2004, 02:00 AM
Post: #8
specifications for LSD rebuild
I´ve heard its kinda hard to make it all fit up correctly.. And just that should be very important. The risk is, that the diff will start to make alot of ugly and scary noises after short time on the road. But if it isnt that hard afterall, i know what to do this winter Smile
Find all posts by this user
12-04-2004, 02:22 AM
Post: #9
specifications for LSD rebuild
build a dif ......
dunno i think its hard i have the old lsd from the yellow one but its still complicatet

Cars:
"99 Lexus IS200
"86 AE86 Kouki Panda Levin GT-Apex (restore project)
"84 AE86 Zenki Blue Levin (project racer)
Motorcycles:
"02 Yamaha R1
"02 Honda Hornet S
"08 BMW R1200GS
Find all posts by this user
12-04-2004, 02:32 AM
Post: #10
specifications for LSD rebuild
I didnt mean that it would be hard to put back together again.. Just heard that if it doesent line up perfectly, the bearings will "burn" and all the work would be wasted... Sad

Youtube Myspace and I´ll Google your Yahoo
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Bluetop Engine Rebuild multiple question Goal 150-160hp Hanzo 16 7,478 04-19-2021 10:08 PM
Last Post: Hanzo
  Rear Differential rebuild chenfon 10 7,195 11-20-2020 12:18 AM
Last Post: totta Crolla
  AE86 4A-GE 16v engine harness rebuild FanIsHere 7 8,520 01-17-2020 08:04 PM
Last Post: Project D
  Rear Caliper Rebuild mad.matt 16 15,108 01-19-2017 02:19 PM
Last Post: Project D
  Rebuild rear disc brakes toyota crown ms112 axle bozu 0 3,498 12-21-2016 09:37 PM
Last Post: bozu

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication