outer tie rods for ae86,oem or T3
12-06-2013, 10:48 PM
Post: #1
outer tie rods for ae86,oem or T3
My outer tie rods are broken again and i wonder if i should go oem again or t3 ones?

Its for a track ae86 that is also driven alot on the road to tracks/rallyish events etc
I wonder if there would be much vibration from the t3 ones(which i dont want so i would go for oem in that case)
Find all posts by this user
12-07-2013, 04:26 AM
Post: #2
outer tie rods for ae86,oem or T3
Hi, dont know why you expect vibrations from them? I´m using them for 2-3 years on track, but also drove from the UK to Germany a few times. Changed the inner tie rod when I put them in and had to change them once since.

Make sure you put the rose joints in a grease filled rubber cover. They will last forever. Wink

1979 Toyota Corolla KE35
1983 Toyota Corolla AE86
1985 Toyota Corolla AE86
Find all posts by this user
12-07-2013, 08:58 AM
Post: #3
outer tie rods for ae86,oem or T3
i have them, good stuff Thumbs up!

drift ae86:308bhp/435nmEDIT:384pk/498nm!!!!>now DEATH)))
Find all posts by this user
12-07-2013, 03:28 PM
Post: #4
outer tie rods for ae86,oem or T3
Sounds good ill order them then ,i already have the t3 steering knuckles Thumbs up!
thanks for the info
Find all posts by this user
12-07-2013, 03:33 PM
Post: #5
outer tie rods for ae86,oem or T3
How are they broken ?
Snapped off, bent or worn out ?

An analogue brain in a digital World
Find all posts by this user
12-07-2013, 05:01 PM
Post: #6
outer tie rods for ae86,oem or T3
worn out,i didnt knew the correct english word.
I usually replace them once a year but they i dont think they are no longer oem sold.(nipparts)
I got different ones this time and i sent them back.
Find all posts by this user
12-07-2013, 09:01 PM
Post: #7
outer tie rods for ae86,oem or T3
I've had the t3 setup for a few years now with no issues, but my car rarely sees daily use. Every component in the kit is a lot beefier than oem. My only gripe is they chose to use a locknut with a nylon insert instead of a castle nut/cotter pin.
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  crank, rods & pistons Alex170984 4 5,376 12-12-2014 05:31 PM
Last Post: Alex170984
  is it possible to get new outer 1/4s for a two door hachi ? adamsaiyad 1 3,463 02-09-2011 10:36 PM
Last Post: adamsaiyad

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication