ae86_sr20 drift cam

[ae86_sr20]

Exedy flywheel/clutck kit from MCNsport


Will be run on this HKS fcon vpro and GT-RS turbo



Polycarbonate windows

[ae86_sr20]

[ae86_sr20]

Engine ready to be re-assembled..

[ae86_sr20]

New winscreen and poly windows fitted

[ae86_sr20]

At long last the engine been fitted


18" GTRs on the rear

[ae86_sr20]

Heading away to be wired up

[ae86_sr20]

New 3" downpipe


6 new Defi guages & link controller


Parked up in WKDimports..600hp D1GP silvia on lift

[ae86_sr20]

Heres a run down on the cars spec so far..

ENGINE
*HKS stage 3 head
*HKS camshafts
*HKS 87mm piston kit
*HKS 1.2mm headgasket
*HKS tubular manifold
*HKS GT-RS turbo
*HKS adjustable actuator
*HKS air filter
*HKS Fcon Vpro ecu (standalone)
*550cc injectors
*Blitz turbo elbow
*3" downpipe
*Custom 3" full exhaust system
*ARP headbolts
*Steel lifters
*Exedy flywheel/clutch kit
*Trust oil cooler & filter relocator
*Custom Front mount intercooler & hard pipe'n
*Custom wiring loom

SUSPENSION/BRAKES
*Cusco coilovers (front & rear from 180sx)
*Cusco adj top mounts (front & rear)
*Cusco adj rear camber arms
*Cusco adj rear toe arms
*Cusco front tower bar
*Cusco pillow tension rods
*Extra lock tie rod arms
*Rosejointed nissan wishbones
*180sx front hubs
*R32 skyline front discs & calipers
*S14 silvia rear hubs/discs/calipers
*Braided brake lines
*Solid rear axle bushes
*Mintex racing pads
*180sx rear axle
*Nismo 2way LSD
*4.3 cwp

INTERIOR
*2 x Cobra hardback seats
*2 x 6 point harneses
*17" vertical hyd handbrake
*25L aluminium tank with swirlpot
*Bosch fuel pump
*Hi-flow fuel filter
*Carbon battery box & drycell battery
*Uras short shifter
*Nismo gearknob
*Custom dashboard
*Defi fuel pressure guage
*Defi oil pressure guage
*Defi oil temp guage
*Defi water temp guage
*Defi boost guage
*Defi 80mm tacho
*Defi link controller
*Greddy profec boost controller
*Apexi rev/speed meter
*Dead man switch/push button start
*OMP 7 point bolt-in cage with door bars

EXTERIOR
*Origin full bodkit (front/back/sides)
*Origin carbon fibre vented bonnet
*J-blood wide arch kit (quarters/wings)
*Jubiride rear spoiler
*Smoked rear lights
*FRP Doors
*FRP Bootlid
*Polycarbonate windows all round (except windscreen)
*Headlights replaced by 2 round spots either side
*18x9.5 Rota GTR's on rear (245/35)
*16x8 Rota grids on front (195/45)
*Carbon mirrors

[ae86_sr20]

Then i decided i wasnt happy with paintwork so i sent it to EDS bodyworx to be rubbed down and repainted in a brighter white..

[ae86_sr20]

Here is a pic i took of the cam earlier this week,much happier with the paintwork this time