Rear Differential rebuild

[chenfon]

(11-16-2020 10:46 AM)totta Crolla Wrote:  It's not really the correct way to replace the bearing as the adjustment for it is done by crushing the spacer a bit at a time and reading the torque required to turn the pinion shaft. I guess you could have accurately measured the length of the old spacer and crushed the new one a few thousands less to allow for the new bearing. If the backlash is really tight after driving for a short distance you might want to try the above... if you haven't already of course!

dear Totta,
can u please do explain in detail? cant 100% get what u mean? like to learn more, tq