!!!!!!!!!!!!RECARO SEATS-URGENT-SOS!!!!!!!!
06-24-2005, 12:45 PM
Post: #9
 
I have Integra Type R Recaro seats in my Hachi, the bolt pattern on those seats was 430mm wide, as is with most Recaro seats. You should measure that.

There are a variety of seat rails available for the AE86, but I never saw a set myself and can thus not comment on seat position, quality or fitment. I heard though that Wiechers rails are of bad quality and ill-fitting.

I took my AE86 seat rails, and did a spacer to bolt them to the Recaros, it can easily be made of flat steel. I did it even twice, as I was not satisfied with the initial seat position, I moved the seat about 4cm more towards the center of the car, now the seat position is just fine.

Height is ok now, that is a point you should check before buying aftermarket rails...

hth
Patrick
Find all posts by this user


Messages In This Thread
[] - alimonos - 06-24-2005, 11:38 AM
[] - nmwisima - 06-24-2005, 11:40 AM
[] - jamiemirror - 06-24-2005, 12:01 PM
[] - nmwisima - 06-24-2005, 12:07 PM
[] - jamiemirror - 06-24-2005, 12:12 PM
[] - JonT - 06-24-2005, 12:20 PM
[] - ZaX - 06-24-2005, 12:24 PM
[] - PetzK - 06-24-2005 12:45 PM
[] - nmwisima - 06-24-2005, 02:38 PM
[] - jamiemirror - 06-24-2005, 02:42 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication