Major Wiring Problems!

[generalachoo]

Thanks Ivan,

Starter now turns over. We tried bridging all combinations for the 4 pins (6 combinations) and none of them turned over. However when we pressed the clutch with the starter relay in the car cranks. Thats good enough for us right now.

We currently have two problems:

1) The wires going from the harness to the alternator are messed up--there are about 5 wires that have stripped ends. Three of them should go to the alternator, right?

It is the second to last picture on this URL: http://75.63.16.121/ae86.html

2) Headlight motors are not running. The motors are plugged in. When we flip the headlight switch inside the car, the taillights turn on (Even though no brake is pressed) as well as the side orange lights in the front. The headlights do not flip up and we cannot test if the headlamps turn on since we are missing the plug on the headlight itself.
Therefore, we measured the voltage by putting one probe to each pin in the brown headlight cable on the harness and the other probe of the meter to the negative terminal of the battery. The result: .07 V for 2 terminals and 0 V for another terminal on the pin.

Again, thanks very much for all the help you have given us. It is much appreciated.