MAPed Blue Top Swap, NOT staying running! Please Help?!
|
05-08-2008, 08:12 PM
Post: #6
|
|||
|
|||
Now.. from what I can tell I have the 2 ohm injectors. I have the Injector Resistor from the USDM car.. and after looking at the Resistor and the plug on the USDM engine harness I think that if I tap the blue and red wires together and then connect them both to the yellow on the Japanese harness.. Then the black with orange ( Might have been black with yellow. ) to the black with orange to get 12v with the key at the on position. It should in turn work or am I wrong?
Also Im going from what I jondee86 said in another of my posts of what the Injector Resistor looks like. |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
No idle below 2000 rpm rich running | Steller Engineering | 3 | 2,214 |
11-30-2022 02:45 PM Last Post: RolanTHUNDER |
|
Red top in the ae86 | gh0st | 25 | 14,755 |
08-08-2022 08:43 PM Last Post: gh0st |
|
Running issues | sam3007 | 6 | 3,799 |
06-26-2022 01:34 PM Last Post: Dave W |
|
Replacing Top Windscreen Moulding | chrisae86 | 2 | 2,806 |
06-18-2022 08:56 PM Last Post: chrisae86 |
|
4age 16v running roughly - diagnostics shows unknown code | Ryo | 8 | 9,160 |
11-09-2020 10:51 AM Last Post: totta Crolla |
User(s) browsing this thread: 1 Guest(s)