Ivan's coupe: seeing RED

[Ivan141]

Vacation time is well and truly over, time to get back to work.

Bondo artist Dennis was in the shed again, finishing off his work on the left rear quarter.



While he was busy doing that, I resumed work on the bonnet. Took it back to bare metal on the top. Toyota used some crazy hard to remove paint on these cars, took a bit of doing. Also hammered out a little dent I created last time I worked on it.


And to finish the day off, a round of epoxy primer everywhere.



Now would you look at that:


To do:
Panel prep work (metal finish any bumps out of it, sand and paint inside, primer outside):
-Bonnet
-Trunklids
-Doors
-Front fenders