Is used TRD exhaust header worth ~200e ?
04-21-2011, 05:54 PM
Post: #5
 
TRD made a 4/2/1 header back in the late 80s, and early 90s

[Image: AEU86 AE86 -  ]


It is a VERY good header..... but I'm NOT entirely sure it is properly sized for your application.

Uzelac Wrote:for 4AGE 16V with Wisecos's, ITB's and 300'/9mm camshafts ?

Any better options ? Or should i just make my own for similar cost ?

Thanks

*IF* you have the above engine running properly... I believe the TRD will limit you some. It is FAR superior to the stock manifold, but if you are running what you say you are running, then the JSP headers are likely the best out there

[Image: AEU86 AE86 -  ]

Dan -

You can |Sad .... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991
Find all posts by this user


Messages In This Thread
[] - Eircamae86 - 04-20-2011, 03:37 PM
[] - DJexor - 04-21-2011, 09:22 AM
[] - Project D - 04-21-2011, 05:40 PM
[] - oldeskewltoy - 04-21-2011 05:54 PM
[] - Project D - 04-21-2011, 06:11 PM
[] - Uzelac - 04-22-2011, 01:38 AM
[] - harkes - 04-22-2011, 06:50 AM
[] - oldeskewltoy - 04-22-2011, 08:19 AM
[] - Uzelac - 04-22-2011, 10:40 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Effects of valve lift - worth it going higher? harkes 18 19,901 03-17-2014 09:21 PM
Last Post: oldeskewltoy
  toyota a series engine....can a fwd corolla engine be used 210 datsun guy 5 9,383 10-30-2013 11:18 PM
Last Post: banpei
  20v 4age header Alex170984 5 8,534 10-30-2013 12:53 AM
Last Post: fax0815
  Exhaust Header 4AGE Mr2 Only Alex170984 1 4,268 02-07-2013 01:36 PM
Last Post: Alex170984
  Ashley competition header ? Uzelac 6 8,333 06-12-2012 01:42 PM
Last Post: Uzelac

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication