Assembling a LEEN J160

[oldeskewltoy]

(06-12-2017 03:53 PM)DJexor Wrote:  Hey Dan, do you know if it's still possible to get a 212mm friction plate for the j160 gearbox on a 4age flywheel/clutch?
If i'm correct the spline is bigger than the T50.

the spline is larger for the J160 instead of the T50. Back when Joe was building he sent me the following.....

Quote:Hi Dan,

The OEM Toyota clutch disk with the spline pattern to match the J160 gearbox.

200mm OD: Toyota Part No.: 31250-28142

212mm OD: Toyota Part No.: 31250-28122

These absolutely definitely fit.

LEEN

I have not been able to find the 212, but I have no looked all that hard yet. BUT this shouldn't be a problem as almost any driveline shop should be able to build the proper disc.