https://www.aeu86.org/forum/ Sat, 25 Apr 2026 14:05:34 +0000 MyBB https://www.aeu86.org/forum/Thread-AE86-Acrylic-Levin-Headlight-Lenses Thu, 06 Jul 2017 02:31:14 +0000 https://www.aeu86.org/forum/Thread-AE86-Acrylic-Levin-Headlight-Lenses
1 pair to US destinations: $100USD shipped
1 pair to international destinations: $127USD shipped

Paypal: occamotif at gmail dot com

30 day money back guarantee on non-installed, undamaged/unblemished lense pair.









]]>
1 pair to US destinations: $100USD shipped
1 pair to international destinations: $127USD shipped

Paypal: occamotif at gmail dot com

30 day money back guarantee on non-installed, undamaged/unblemished lense pair.









]]> https://www.aeu86.org/forum/Thread-NEW-re-designed-exhaust-manifold-gasket Tue, 02 Feb 2016 16:32:00 +0000 https://www.aeu86.org/forum/Thread-NEW-re-designed-exhaust-manifold-gasket


This is a completely re-designed exhaust gasket(designed with my assistance!)...it fits both 16V and 20V heads, the mounting holes have been MOVED in relation to the ports to allow the port roof to be ported! Priced @ 1/3 the cost($34.00) of the Toda, or Tomei - http://www.sv3power.com/store/index.php?...cts_id=217]]>


This is a completely re-designed exhaust gasket(designed with my assistance!)...it fits both 16V and 20V heads, the mounting holes have been MOVED in relation to the ports to allow the port roof to be ported! Priced @ 1/3 the cost($34.00) of the Toda, or Tomei - http://www.sv3power.com/store/index.php?...cts_id=217]]> https://www.aeu86.org/forum/Thread-Monasterevin-Motors-Genuine-Parts-and-info Tue, 26 Jan 2016 09:59:07 +0000 https://www.aeu86.org/forum/Thread-Monasterevin-Motors-Genuine-Parts-and-info
My name is Mannix and I work in a Toyota dealer in Ireland. I'm hoping to provide the members on the site with a good service and as much help as I can.

So far we sell on numerous other sites with great success and to some of the members on here already.

I might just leave this thread as our only one and work off here, so if you have any queries regarding parts, please don't hesitate to contact me.

Thanks,

Mannix Lacey.]]>
My name is Mannix and I work in a Toyota dealer in Ireland. I'm hoping to provide the members on the site with a good service and as much help as I can.

So far we sell on numerous other sites with great success and to some of the members on here already.

I might just leave this thread as our only one and work off here, so if you have any queries regarding parts, please don't hesitate to contact me.

Thanks,

Mannix Lacey.]]> https://www.aeu86.org/forum/Thread-Kajoba-Works-4A-GE-16V-dual-plenum-intake-manifolds Fri, 07 Aug 2015 11:10:26 +0000 https://www.aeu86.org/forum/Thread-Kajoba-Works-4A-GE-16V-dual-plenum-intake-manifolds





For RWD turbo installations!

- velocity stacks
- 65mm billet throttle body, black or silver anodized (only black available at the moment)
- main plenum displacement 1.5x engine displacement (2.4l)
- 4x 4mm hose connections for fuel pressure regulator, gauges, boost controller and whatnot.
- 2x 10mm hose connections for brake booster and IAC-valve.
- durable black wrinkle paint

NOTE! I'll update the photos ASAP to show the black throttle body as well.

The benefit of a dual-plenum design is the more equal distribution of air for all cylinders in a turbo application. Usually this comes with a small drop in peak power but also an increase in response and driveability due to a smoother torque curve. Excellent choice for a daily driven / trackday / circuit racing vehicle


Currently out of stock, will update when available again.


Kajoba Works
kjb@kajobaworks.com
http://www.kajobaworks.com / http://www.facebook.com/kajobaworks]]>





For RWD turbo installations!

- velocity stacks
- 65mm billet throttle body, black or silver anodized (only black available at the moment)
- main plenum displacement 1.5x engine displacement (2.4l)
- 4x 4mm hose connections for fuel pressure regulator, gauges, boost controller and whatnot.
- 2x 10mm hose connections for brake booster and IAC-valve.
- durable black wrinkle paint

NOTE! I'll update the photos ASAP to show the black throttle body as well.

The benefit of a dual-plenum design is the more equal distribution of air for all cylinders in a turbo application. Usually this comes with a small drop in peak power but also an increase in response and driveability due to a smoother torque curve. Excellent choice for a daily driven / trackday / circuit racing vehicle


Currently out of stock, will update when available again.


Kajoba Works
kjb@kajobaworks.com
http://www.kajobaworks.com / http://www.facebook.com/kajobaworks]]> https://www.aeu86.org/forum/Thread-Kajoba-Works-E7-AE86-weld-in-chassis-braces Mon, 09 Mar 2015 13:25:20 +0000 https://www.aeu86.org/forum/Thread-Kajoba-Works-E7-AE86-weld-in-chassis-braces


1.5mm steel, easy to weld. Made in Finland!

The smaller ones are for joining the front chassis leg to the firewall, preventing the cracking and buckling that happens on cars that see large twisting forces on the chassis.

The larger ones are for strengthening the rear shock absorber upper mount. If you're going to use coilovers at the back, these do a nice job reinforcing the mount area and spreading the loads.

PLEASE NOTE! These were designed for LHD cars. The rear ones are more than likely going to fit RHD cars as well, but the front pieces fit exactly to the shapes of the front chassis legs and firewall. RHD firewall shape might differ and unfortunately I don't have access to RHD cars to confirm this

Out of stock for the time being, will update when these are available again.

Kajoba Works / Kaj Barck
kjb@kajobaworks.com
http://www.kajobaworks.com]]>


1.5mm steel, easy to weld. Made in Finland!

The smaller ones are for joining the front chassis leg to the firewall, preventing the cracking and buckling that happens on cars that see large twisting forces on the chassis.

The larger ones are for strengthening the rear shock absorber upper mount. If you're going to use coilovers at the back, these do a nice job reinforcing the mount area and spreading the loads.

PLEASE NOTE! These were designed for LHD cars. The rear ones are more than likely going to fit RHD cars as well, but the front pieces fit exactly to the shapes of the front chassis legs and firewall. RHD firewall shape might differ and unfortunately I don't have access to RHD cars to confirm this

Out of stock for the time being, will update when these are available again.

Kajoba Works / Kaj Barck
kjb@kajobaworks.com
http://www.kajobaworks.com]]> https://www.aeu86.org/forum/Thread-86-Garage-Magazine-Issue-1-Volume-2 Fri, 13 Feb 2015 05:14:02 +0000 https://www.aeu86.org/forum/Thread-86-Garage-Magazine-Issue-1-Volume-2 Though it's been a spell, the 1st issue of the 2nd 86 Garage Magazine volume is out now.

New full bleed prints and sturdier pages.

Featuring Josh(iroku)ua Garcia w/ one of the first 1UZ swapped 86s States side - it's all about the time attack.

Get your copy here: www.86garagemagazine.com

]]> Though it's been a spell, the 1st issue of the 2nd 86 Garage Magazine volume is out now.

New full bleed prints and sturdier pages.

Featuring Josh(iroku)ua Garcia w/ one of the first 1UZ swapped 86s States side - it's all about the time attack.

Get your copy here: www.86garagemagazine.com

]]> https://www.aeu86.org/forum/Thread-86-Garage-Magazine-Back-Issues-now-available-on-Kindle Mon, 19 Jan 2015 16:30:49 +0000 https://www.aeu86.org/forum/Thread-86-Garage-Magazine-Back-Issues-now-available-on-Kindle 86 Garage Magazine: Volume 1 (2012)



Plug in "86 Garage Magazine" into Amazon's search bar to see all available issues.]]> 86 Garage Magazine: Volume 1 (2012)



Plug in "86 Garage Magazine" into Amazon's search bar to see all available issues.]]> https://www.aeu86.org/forum/Thread-OST-and-JE-Piston-collaborate-New-piston Fri, 27 Jun 2014 18:37:34 +0000 https://www.aeu86.org/forum/Thread-OST-and-JE-Piston-collaborate-New-piston


Why put new inside quote marks? Because the pistons crown isn't anything new... the "new" pistons crown design is actually rather olde... The crown of the new piston was derived from 13101-AE851.




So why a new piston?

Nearly every 4AGE piston out there has a significant dome because of 2 reasons....

1) Nearly every 4AGE piston is designed for O/S valves, either 1mm O/S or full on Atalntic... 2mm O/S. Accommodating O/S valves in your pistons lowers compression, and thus requires more crown to compensate.


2) This reason is far more subtle... the crown shape of the olde TRD piston extends to just past the valve reliefs, to a tapered edge that diverts/directs the "squish" up @ the spark plug. Because of this extended area, the crown can actually be LOWER.

Why is a lower crown better? Superior flame propagation.





So if the crown isn't new, then what is new?

The skirt...... JE Piston's Asymmetrical skirts



The original piston was designed with minimal skirt width... remember this had been designed as a high performance piston and low drag is a benefit. The problem with the 13101-AE851 wasn't the crown... but the VERY narrow skirt - about 41mm. That narrow works for a time, but it will not be long lived. The thrust side of the JE Asymmetrical is over 57mm providing a much more stable piston on the major thrust load side.


Availability:
cylinder bores - 81mm, 81.5mm, 82mm

wrist pins - 18mm, or 20mm

compression height - 30.5mm

crown volume - 2.5cc

Compression ratio range: 10.7 to 12.2*

10.7 - stock undecked block, stock head gasket, combustion chamber volume of 37cc
12.2 - decked block, stock head gasket, combustion chamber volume of 32.5cc

* 12.6 - zero deck, TRD .8mm gasket, combustion chamber volume of 32.5cc



Now.... the bad news... they aren't free

MSRP = $675.00 per set - this includes low tension rings. Options: Coated skirts + $70.00. Checking on crown coating costs at this time.

As always freight is extra.

The first set is tentatively sold at a partial discount.]]>


Why put new inside quote marks? Because the pistons crown isn't anything new... the "new" pistons crown design is actually rather olde... The crown of the new piston was derived from 13101-AE851.




So why a new piston?

Nearly every 4AGE piston out there has a significant dome because of 2 reasons....

1) Nearly every 4AGE piston is designed for O/S valves, either 1mm O/S or full on Atalntic... 2mm O/S. Accommodating O/S valves in your pistons lowers compression, and thus requires more crown to compensate.


2) This reason is far more subtle... the crown shape of the olde TRD piston extends to just past the valve reliefs, to a tapered edge that diverts/directs the "squish" up @ the spark plug. Because of this extended area, the crown can actually be LOWER.

Why is a lower crown better? Superior flame propagation.





So if the crown isn't new, then what is new?

The skirt...... JE Piston's Asymmetrical skirts



The original piston was designed with minimal skirt width... remember this had been designed as a high performance piston and low drag is a benefit. The problem with the 13101-AE851 wasn't the crown... but the VERY narrow skirt - about 41mm. That narrow works for a time, but it will not be long lived. The thrust side of the JE Asymmetrical is over 57mm providing a much more stable piston on the major thrust load side.


Availability:
cylinder bores - 81mm, 81.5mm, 82mm

wrist pins - 18mm, or 20mm

compression height - 30.5mm

crown volume - 2.5cc

Compression ratio range: 10.7 to 12.2*

10.7 - stock undecked block, stock head gasket, combustion chamber volume of 37cc
12.2 - decked block, stock head gasket, combustion chamber volume of 32.5cc

* 12.6 - zero deck, TRD .8mm gasket, combustion chamber volume of 32.5cc



Now.... the bad news... they aren't free

MSRP = $675.00 per set - this includes low tension rings. Options: Coated skirts + $70.00. Checking on crown coating costs at this time.

As always freight is extra.

The first set is tentatively sold at a partial discount.]]> https://www.aeu86.org/forum/Thread-DCW-oldschool-wheels-parts-sale Thu, 19 Jun 2014 13:18:18 +0000 https://www.aeu86.org/forum/Thread-DCW-oldschool-wheels-parts-sale https://www.aeu86.org/forum/Thread-Sakura-Fab-4AG-Heat-Screen-Intake-Manifold-Gasket Fri, 27 Dec 2013 17:50:09 +0000 https://www.aeu86.org/forum/Thread-Sakura-Fab-4AG-Heat-Screen-Intake-Manifold-Gasket



smallport gasket:




largeport gasket:




Test Vehicle information
*The following conditions were consistent in both before and after states in collecting the proceeding data.
Engine: 1.6 (naturally aspirated w/ 278 in/ex cams) small port
State: 1100RPM idle
Coolant temp: 76C/168F
Vaccum: 10 in.hg
Ambient temp: 11C/52F

w/ Stock Intake Manifold Gasket (temperature reader held at ~24")


w/ Heat Screen Gasket (temperature reader held at ~24")

**Temperature readings were taken from approximately the same location on the no. 1 cylinder intake runner.

$40USD + $7USD shipping to lower 48 states /

Don't forget to specify if it's for either a large port or small port when ordering the Heat Shield gasket.

For international sales, please email us with your shipping information for proper shipping prices.

PayPal:
]]>



smallport gasket:




largeport gasket:




Test Vehicle information
*The following conditions were consistent in both before and after states in collecting the proceeding data.
Engine: 1.6 (naturally aspirated w/ 278 in/ex cams) small port
State: 1100RPM idle
Coolant temp: 76C/168F
Vaccum: 10 in.hg
Ambient temp: 11C/52F

w/ Stock Intake Manifold Gasket (temperature reader held at ~24")


w/ Heat Screen Gasket (temperature reader held at ~24")

**Temperature readings were taken from approximately the same location on the no. 1 cylinder intake runner.

$40USD + $7USD shipping to lower 48 states /

Don't forget to specify if it's for either a large port or small port when ordering the Heat Shield gasket.

For international sales, please email us with your shipping information for proper shipping prices.

PayPal:
]]> https://www.aeu86.org/forum/Thread-Sakura-Fab-W58-R154-to-AE86-Transmission-Mount Fri, 27 Dec 2013 17:47:01 +0000 https://www.aeu86.org/forum/Thread-Sakura-Fab-W58-R154-to-AE86-Transmission-Mount
This mount will space the bottom of your R154 or W58 transmission at the transfer case 2" from the chassis.
Well gusseted and instead of tack welds the mount incorporates full run & penetration welds.









$100.00USD + $16.85USD flat rate shipping within the US ($14.85 to APO/FPO/DPO)

Please email us for international shipping prices to your specific location.

2 available

PayPal:
]]>
This mount will space the bottom of your R154 or W58 transmission at the transfer case 2" from the chassis.
Well gusseted and instead of tack welds the mount incorporates full run & penetration welds.









$100.00USD + $16.85USD flat rate shipping within the US ($14.85 to APO/FPO/DPO)

Please email us for international shipping prices to your specific location.

2 available

PayPal:
]]> https://www.aeu86.org/forum/Thread-KP61-AE86-TE72-MA60-amp-More-NEW-PARTS-Techno-Toy-Tun Fri, 20 Sep 2013 17:46:58 +0000 https://www.aeu86.org/forum/Thread-KP61-AE86-TE72-MA60-amp-More-NEW-PARTS-Techno-Toy-Tun
Contact us at:

Techno Toy Tuning
4211-A Business Dr.
Shingle Springs, CA 95682
USA
(530)672-8600
ggtyler@yahoo.com

All prices in USD. Shipping overseas is no problem at all!

And be sure to check out our site at http://TechnoToyTuning.com

AE86 Master Cylinder Brace for LHD cars $80



Shock Tower Plates for the AE86 $140



TE72, AE71 etc... Front and rear door Cards $140 front, $100 Rear





4" Shifter extension in stainless for all Toyotas 12mm x 1.25 $45



Rear interior Side Panels for AE86 Coupe and Hatch $90 for the coupe, $100 for the hatch



Trunk panels for the AE86 hatch $70



Lexan side windows for the AE86 Coupe $90



Lexan rear windows for the AE86 Coupe $90



Supports for Rear Lexan Window on AE86 Coupe $40



AE86 Coupe C-Pillar Bar in fine wrinkle black or metallic blue powdercoating $90



AE86 Limited Edition Black Camber Plates $190



AE86 Manual Rack Swap MK3 Intermediate Shafts $80



AE86 Coupe Rear Firewall $75



AE86 Coupe Rear Parcel Shelf $50

]]>
Contact us at:

Techno Toy Tuning
4211-A Business Dr.
Shingle Springs, CA 95682
USA
(530)672-8600
ggtyler@yahoo.com

All prices in USD. Shipping overseas is no problem at all!

And be sure to check out our site at http://TechnoToyTuning.com

AE86 Master Cylinder Brace for LHD cars $80



Shock Tower Plates for the AE86 $140



TE72, AE71 etc... Front and rear door Cards $140 front, $100 Rear





4" Shifter extension in stainless for all Toyotas 12mm x 1.25 $45



Rear interior Side Panels for AE86 Coupe and Hatch $90 for the coupe, $100 for the hatch



Trunk panels for the AE86 hatch $70



Lexan side windows for the AE86 Coupe $90



Lexan rear windows for the AE86 Coupe $90



Supports for Rear Lexan Window on AE86 Coupe $40



AE86 Coupe C-Pillar Bar in fine wrinkle black or metallic blue powdercoating $90



AE86 Limited Edition Black Camber Plates $190



AE86 Manual Rack Swap MK3 Intermediate Shafts $80



AE86 Coupe Rear Firewall $75



AE86 Coupe Rear Parcel Shelf $50

]]> https://www.aeu86.org/forum/Thread-AJPS-com-au-STEERING-LOCK-SPACERS-and-REAR-brake-upgrade Sun, 28 Apr 2013 16:18:40 +0000 https://www.aeu86.org/forum/Thread-AJPS-com-au-STEERING-LOCK-SPACERS-and-REAR-brake-upgrade


Technical information

Made in Australia
High quality steel 4140
Locking tabs so they never come loose
Add 25mm to the rack shaft

Blurb

Gives your car a huge improvement in lock
Suit competition drift use
NB: THIS ITEM IS FOR RACE OR OFF ROAD USE ONLY
NB: longer control arms (corona, rose jointed are highly recommended or you may need to cut 8mm off your tie rod ends to achieve toe out (some racks only)
This item suits ALL manual ae86, ke70, ae71, rt142, kp61 and aw11 steering racks
Install instructions on the website


Price is 60euro shipped via airmail

Payment via paypal

Although I will have a german bank account set up in a month and will be able to accept payments into that

Can also supply other parts from the website

Thanks



Also available



Rear brake upgrade to run the 258mm S13 silvia rear discs.

$170 euro shipped via air]]>


Technical information

Made in Australia
High quality steel 4140
Locking tabs so they never come loose
Add 25mm to the rack shaft

Blurb

Gives your car a huge improvement in lock
Suit competition drift use
NB: THIS ITEM IS FOR RACE OR OFF ROAD USE ONLY
NB: longer control arms (corona, rose jointed are highly recommended or you may need to cut 8mm off your tie rod ends to achieve toe out (some racks only)
This item suits ALL manual ae86, ke70, ae71, rt142, kp61 and aw11 steering racks
Install instructions on the website


Price is 60euro shipped via airmail

Payment via paypal

Although I will have a german bank account set up in a month and will be able to accept payments into that

Can also supply other parts from the website

Thanks



Also available



Rear brake upgrade to run the 258mm S13 silvia rear discs.

$170 euro shipped via air]]> https://www.aeu86.org/forum/Thread-AE86-Touge-Shirt-and-more-30-Off-on-preorder Mon, 25 Mar 2013 13:45:14 +0000 https://www.aeu86.org/forum/Thread-AE86-Touge-Shirt-and-more-30-Off-on-preorder
Preorder price is 15€ + p&p instead of 20€ + p&p
Valid only until April 15th!

For more info visit http://www.autoreverb.com or contact via autoreverb[at]gmail.com

AE86 Touge shirt


AE82 Oldschool racing shirt


Hard Parker stealth!


Maximum Attack, for all you rally fans.
]]>
Preorder price is 15€ + p&p instead of 20€ + p&p
Valid only until April 15th!

For more info visit http://www.autoreverb.com or contact via autoreverb[at]gmail.com

AE86 Touge shirt


AE82 Oldschool racing shirt


Hard Parker stealth!


Maximum Attack, for all you rally fans.
]]> https://www.aeu86.org/forum/Thread-Awesome-Levin-N2-shirt Wed, 23 Jan 2013 21:06:21 +0000 https://www.aeu86.org/forum/Thread-Awesome-Levin-N2-shirt ):

The shirt has been designed by SweetOblivion

You can find the shirt for sale here:
http://sweetoblivion.bigcartel.com/product/heel-toe

  shop_image_heelandtoe_01_745.jpg (Size: 239.11 KB / Downloads: 531) ]]> ):

The shirt has been designed by SweetOblivion

You can find the shirt for sale here:
http://sweetoblivion.bigcartel.com/product/heel-toe

  shop_image_heelandtoe_01_745.jpg (Size: 239.11 KB / Downloads: 531) ]]> https://www.aeu86.org/forum/Thread-Gearhead-Shirts-Still-plenty-of-86-shirts-to-go-around Mon, 29 Oct 2012 21:32:51 +0000 https://www.aeu86.org/forum/Thread-Gearhead-Shirts-Still-plenty-of-86-shirts-to-go-around

http://gearheadshirts.com/products/12803...ae86-shirt


http://gearheadshirts.com/products/96620...olla-shirt
]]>

http://gearheadshirts.com/products/12803...ae86-shirt


http://gearheadshirts.com/products/96620...olla-shirt
]]> https://www.aeu86.org/forum/Thread-FRS-86-Shirts-amp-MORE Wed, 17 Oct 2012 23:05:02 +0000 https://www.aeu86.org/forum/Thread-FRS-86-Shirts-amp-MORE














]]>














]]> https://www.aeu86.org/forum/Thread-Wilwood-Brake-Kits-%E2%82%AC600-each Wed, 19 Sep 2012 07:47:17 +0000 https://www.aeu86.org/forum/Thread-Wilwood-Brake-Kits-%E2%82%AC600-each
Kit consists of

2 off Wilwood Dynalite calipers

2 off Drilled and vented discs (grooved only discs €30 extra)

All mounting brackets and fitting kit

Brake pads

Braided stainless steel hose kit

Tech:
257 x 23mm disc for use with 13" wheels

approx 300mm clearance required

275 x 25mm disc for use with 15" and some 14" wheels

approx 320mm clearance required

275mm kit may require slight trimming of the lower control arm depending on LCA and roll centre

Replacement parts

Discs: €50 per side
Pads: Wilwood (as per kit) €40, Mintex M1144 €100, Ferodo DS 2500, €150



Fitted:



Price €600 per kit

Delivery to uk €18, rest of eu approx €30]]>
Kit consists of

2 off Wilwood Dynalite calipers

2 off Drilled and vented discs (grooved only discs €30 extra)

All mounting brackets and fitting kit

Brake pads

Braided stainless steel hose kit

Tech:
257 x 23mm disc for use with 13" wheels

approx 300mm clearance required

275 x 25mm disc for use with 15" and some 14" wheels

approx 320mm clearance required

275mm kit may require slight trimming of the lower control arm depending on LCA and roll centre

Replacement parts

Discs: €50 per side
Pads: Wilwood (as per kit) €40, Mintex M1144 €100, Ferodo DS 2500, €150



Fitted:



Price €600 per kit

Delivery to uk €18, rest of eu approx €30]]> https://www.aeu86.org/forum/Thread-Gearhead-Shirts-33-off-orders-over-33 Fri, 14 Sep 2012 18:21:03 +0000 https://www.aeu86.org/forum/Thread-Gearhead-Shirts-33-off-orders-over-33
http://gearheadshirts.com

]]>
http://gearheadshirts.com

]]> https://www.aeu86.org/forum/Thread-Track-and-road-brake-kits Tue, 11 Sep 2012 14:36:46 +0000 https://www.aeu86.org/forum/Thread-Track-and-road-brake-kits
Two piece steel mounting bracket, needs to be drilled and tapped yet but you get the idea!



Assembled with 275mm drilled disc

]]>
Two piece steel mounting bracket, needs to be drilled and tapped yet but you get the idea!



Assembled with 275mm drilled disc

]]>