Full Titanium Cat Back Systems: AE86 brothers, your support

[OnBail]

It has taken me years of persistence and finally I am close!

The head management at Tomei Powered Inc in Japan is now considering going ahead with the development and production of a Full Titanium cat back system for the AE86!
Yes that's right, FULL as in the piping and hanger arms are completely 100% Titanium!
The only parts that aren't Titanium are
The springs that connect the piping.
The Clamp Band that connect the piping.
However, the prototype hasn't been made yet, so more details will come later if it gets the go ahead.


FYI: The Tomei EXPREME Ti for the MITSUBISHI LANCER EVO 10: weight comparison is
Stock is 20.05kg (44.2lbs)
Tomei EXPREME Ti is 4.4kg (9.7lbs)

For full details on the product, view the official blog here
http://www.tomeipowered.com/BTE/index.ph...explained/


Ref: My Toda Racing stainless steel car back system weights around 16-18kg from memory
http://www.toda-racing.co.jp/en/product/...4ag-3.html

As you all know, the key characteristic of the AE86 is being lightweight. For those of you whom have been fortunate enough to have a right in a sub 800kg AE86, at full throttle, high speed drift or at the limits of circuit driving, will understand the difference.

So I urge you all, please complete this simple online survey, so that the key members at Tomei can see your valued comments.


In the comments at the end; please feel free to add any other requests.
Even suggestions on
- Pipe diameter size (due to regulations in events or laws in your country/region).
- Layout (over the rear axle or under it).
- Tail tip diameter; nice cool subtle size or a big ass American sized canon!
- The exit angle of the tail pipe (straight out or on an angle)
- Straight / De-cat pipe; (do you want it included with the kit or not).


Here is the link
https://www.tomeiusa.com/question/user/q....asp?ID=15