tacho issues using haltech e6x on 4ag 20v
06-04-2013, 08:21 PM
Post: #1
tacho issues using haltech e6x on 4ag 20v
Hi, I installed a haltech E6X ECU with a haltech ignition module and twin coils for my 4qag 20v.

the engine is up and running great but my original dash tacho didn't work. Im using my Apexi SAFC as a tacho for now.

Someone told me to use an MSD 8910 adapter to correct this issue so I bought it but when I connected it to one of the coils, the tacho works but shows a wrong RPM reading. Tried to connect it to both coils and the engine didn't work correctly.

I'm kind of lost now...

Any help will be appreciated

thanks!
Find all posts by this user
06-04-2013, 10:59 PM
Post: #2
tacho issues using haltech e6x on 4ag 20v
Do a search for tach signal boosters... you need to either beef up the ECU's tacho output signal or figure out which components to change on the dash to make it respond to lower voltage signals.

FABRICA MI DIEM, PVNC!
Visit this user's website Find all posts by this user
06-04-2013, 11:08 PM
Post: #3
tacho issues using haltech e6x on 4ag 20v
i believe this is the same,i also have one made for my 4AGZE ae101 since i wont read the signals either

check the info in the link scroll to the bottom
http://www.ebay.co.uk/itm/DAKOTA-DIGITAL...5655e25c8b
Find all posts by this user
06-05-2013, 07:00 AM
Post: #4
tacho issues using haltech e6x on 4ag 20v
If you can access the negative terminal on both coils, you could make
this for a couple of bux...

[Image: AEU86 AE86 - tacho issues using haltech e6x on 4ag 20v]

Cheers... jondee86
Find all posts by this user
06-05-2013, 06:34 PM
Post: #5
tacho issues using haltech e6x on 4ag 20v
For my 20V with MS DIYPNP and 4 Yaris COP's i'm using the 4 IGF signals to drive the tacho.

Keeping the AE86 alive!
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  20v Silvertop - New Haltech ECU & Couple of questions 20valver 10 2,075 05-26-2024 07:40 PM
Last Post: totta Crolla
  Running issues sam3007 6 2,748 06-26-2022 01:34 PM
Last Post: Dave W
  Question about 4AG 20v Engine Block CHACAMAN 1 1,604 06-10-2022 05:17 PM
Last Post: oldeskewltoy
  Newb question on "how-to" guide for ITBs on JDM 4AG Bluetop w/ MAP mister86 12 10,951 02-10-2020 06:39 PM
Last Post: Power_uP
  What suspension set up are people using? kazi 8 8,072 07-06-2017 05:26 AM
Last Post: headrush

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication