front setup
02-14-2012, 07:38 PM
Post: #1
front setup
hi..
ok im in need of some help to setup the front of my drift car 86...
iv been told that there is special degrease that i can set my camber,caster etc with using a laser tracking set up which my friend has in his garage to enable the car to be at its best setup position for coners

any help please
thanks Thumbs up!
Find all posts by this user
02-21-2012, 09:13 PM
Post: #2
front setup
bump
Find all posts by this user
12-11-2016, 06:27 AM
Post: #3
front setup
It's dependant on driving style and a few other factors. But as a rough guide, wind as much castor as possible into it. May need to trim the bumper. Neg2.5 camber is a decent starting point and then toe.

Toe is very personal as it dictates how the car feels on turn in. Set it neutral to start with then fiddle with small amounts of toe in or toe out and find your preference.

I THINK toe in is for stability at speed and toe out is for sharpness of turn in... #dontquotemeonit lol its been a few years since I played with it.



Sent from my HTC_0P6B using Tapatalk

clutch kick, switch, tree .... oowwww
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Drift setup, choices on a budget ggrahl 13 23,386 05-28-2013 05:32 PM
Last Post: Rascal21
  Best setup for drifting... Okami 68 87,741 01-19-2012 11:20 PM
Last Post: Okami
  Best Drift Setup? - Newbie - driftboy84 12 34,333 08-12-2010 02:35 PM
Last Post: DRIFTMOTION
  Which setup for drifting...? GSMUnlockDK 32 30,038 07-23-2006 03:50 PM
Last Post: Bean

Forum Jump:


User(s) browsing this thread: 3 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication