Rebuilding steering rack, which parts to renew?

[assassin10000]

Aram Wrote:I found these partnumbers, the bold ones are specificly for the AW11 rack, which I have, the other ones are for both.
My technical english is not good enough to recognize every item you listed above, but I will try to connect them.
I will make them red, can you confirm if this is ok?

I also have heard something about spacers, to lenghten the rack a bit.
But I think this is for more steering angle, I found something called the battleversion 2?

The rack will work without this and have the normal steering angle?

IF these are for an AW11 you do NOT want them for a AE86. Use AE86 inner & outer tie rod ends on the AW11 rack - for swapping into an AE86. That would also include using AE86 steering rack boots.
45046-29135 Outer Tie Rod End (x2 LH and RH are the same)
45503-19066 Inner Tie Rod End (x2 LH and RH are the same)

These sound like what you need... But I think your missing the 'end' bushing for the passenger side of the rack.
90363-13004 Pinion Gear Lower Bearing (9/89-12/89)
90363-15015 Pinion Gear Upper Bearing (8/89/12/89)
90311-15002 Pinion Gear Oil Seal
44277-17010 Rack Guide Seat

A quick check on toyodiy.com and this 'might' be the p# you need for the bushing.
BUSH, STEERING RACK 45522-17010


Andrew