|
OST-040: BOOOOSTed
|
|
08-16-2016, 10:37 PM
Post: #11
|
|||
|
|||
OST-040: BOOOOSTed
oldeskewltoy Wrote:all that is left to do... is set cam - valve clearances...... the cam sheet... with the the valve opening and closing events laid out.... ![[Image: AEU86 AE86 - OST-040: BOOOOSTed]](http://ost.ebeans.ch/albums/userpics/10005/cam_timing_with_overlay_noname.jpg "AEU86 AE86 - OST-040: BOOOOSTed") 9.4mm of lift is getting close to requiring clearancing the head so the lobes don't hit.... but not quite ![[Image: AEU86 AE86 - OST-040: BOOOOSTed]](http://ost.ebeans.ch/albums/userpics/10005/cam_to_head_clearance___bucket.jpg "AEU86 AE86 - OST-040: BOOOOSTed") setting clearances... spec is .20mm(.008") on the intake side, and .25mm(.010")... a thousandth is within tolerance. ![[Image: AEU86 AE86 - OST-040: BOOOOSTed]](http://ost.ebeans.ch/albums/userpics/10005/cam_clearances_set.jpg "AEU86 AE86 - OST-040: BOOOOSTed") Final questions: What is actual valve lift on exhaust valve #4?? And on #3 exhaust valve? This head is now done, and will be heading back to it's owner shortly..... Dan - You can |  .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| (Catching up...) OST-082: Nope, never again... at least not without all the parts | oldeskewltoy | 0 | 54 |
06-28-2022 09:17 PM Last Post: oldeskewltoy |
|
| (Catching up...) OST-081: STOP... do not touch if you don't know wtf you are doing | oldeskewltoy | 0 | 141 |
06-17-2022 09:07 PM Last Post: oldeskewltoy |
|
| (Catching up) OST-080 (and OST-074):Dan Dabbles in Dubs | oldeskewltoy | 0 | 103 |
06-13-2022 05:33 PM Last Post: oldeskewltoy |
|
| (Catching up...) OST-079: When Cat Cams went dark | oldeskewltoy | 2 | 169 |
06-13-2022 05:04 PM Last Post: oldeskewltoy |
|
| OST-078: Not the only one who signs their work..... | oldeskewltoy | 9 | 1,137 |
02-03-2022 08:52 PM Last Post: oldeskewltoy |
|
User(s) browsing this thread: 1 Guest(s)