NEWERA - CUSTOM PILLOW BALL REAR LINKS.
08-04-2008, 05:04 PM
Post: #1
NEWERA - CUSTOM PILLOW BALL REAR LINKS.
We've had a batch of these lower tie rods and lateral rod specially commissioned for our cars and have a few sets remaining...

These are VERY heavy duty. The larger pillow ball bearings are much more resistant to wear than smaller ones, since they will spread loads more evenly. Construction is all stainless steel too. Note we haven't made upper ones, as that's where noise usually comes from when fitting a full set. With these fitted, the rear end becomes much more finely controllable for sliding. Note that by increasing the length of lower rods, this decreases grip also.

These are NOT available elsewhere, they've been developed and made to special design by an MSC and D1 Street Legal racer in Japan just for us.
Hurry though, our regular AE86 customers are reserving these fast, so they'll be gone very soon.

PM us if you have serious interest in reserving the last set.

[Image: AEU86 AE86 - NEWERA - CUSTOM PILLOW BALL REAR LINKS.]

[Image: AEU86 AE86 - NEWERA - CUSTOM PILLOW BALL REAR LINKS.]

[Image: AEU86 AE86 - NEWERA - CUSTOM PILLOW BALL REAR LINKS.]

[Image: AEU86 AE86 - NEWERA - CUSTOM PILLOW BALL REAR LINKS.]

[Image: AEU86 AE86 - NEWERA - CUSTOM PILLOW BALL REAR LINKS.]

[Image: AEU86 AE86 - NEWERA - CUSTOM PILLOW BALL REAR LINKS.]

VISIT OUR NEW WEBSITES!!!!
A Tuner's Paradise
Automotive Art On Film
Dedication To Automotive Perfection

Japan Office Tel - (Calls charged at UK National Rate): 0207-193-3979.
Mobile (Japan): +81- (0) 90-4133-3825 Fax (Japan): +81-(0) 47-307-4678
Visit this user's website Find all posts by this user
08-04-2008, 05:13 PM
Post: #2
NEWERA - CUSTOM PILLOW BALL REAR LINKS.
lenght and price of the lateral rod shipped to nl plz.

I assume its shorter than the orginal one ?

Cars:
"99 Lexus IS200
"86 AE86 Kouki Panda Levin GT-Apex (restore project)
"84 AE86 Zenki Blue Levin (project racer)
Motorcycles:
"02 Yamaha R1
"02 Honda Hornet S
"08 BMW R1200GS
Find all posts by this user
08-04-2008, 07:30 PM
Post: #3
NEWERA - CUSTOM PILLOW BALL REAR LINKS.
Price on the lateral bar shipped to Denmark Thumbs up!

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - NEWERA - CUSTOM PILLOW BALL REAR LINKS.]
Visit this user's website Find all posts by this user
08-05-2008, 06:46 AM
Post: #4
NEWERA - CUSTOM PILLOW BALL REAR LINKS.
Next time my car's on a lift for service work I'll get some decent pictures of these babies in place.

Just one last set left now, but we'll be commissioning another set if there's sufficient demand from serious people.

From centre of each pillowball 78cm.
PM's Sent Smile

VISIT OUR NEW WEBSITES!!!!
A Tuner's Paradise
Automotive Art On Film
Dedication To Automotive Perfection

Japan Office Tel - (Calls charged at UK National Rate): 0207-193-3979.
Mobile (Japan): +81- (0) 90-4133-3825 Fax (Japan): +81-(0) 47-307-4678
Visit this user's website Find all posts by this user
08-14-2008, 03:17 PM
Post: #5
NEWERA - CUSTOM PILLOW BALL REAR LINKS.
look like an awesome product.....

if only i hadnt just purchased some australian made ones Sad
Find all posts by this user
08-28-2008, 12:17 AM
Post: #6
NEWERA - CUSTOM PILLOW BALL REAR LINKS.
i shall be on to you in the future for some parts Thumbs up!
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Adjustable 4 links Poly Bushed €220 ep71 4 5,035 03-26-2012 10:56 AM
Last Post: corolla4agze
  nismohachigo custom bracket Abdullah 4 4,577 01-12-2012 07:37 PM
Last Post: Abdullah
  Pillow Ball Tension Rods for AE86 miniae86 1 5,600 09-27-2010 10:42 AM
Last Post: nmwisima

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication