My braaaakes, what about yours? [brake topic]
02-28-2012, 06:53 PM
Post: #31
My braaaakes, what about yours? [brake topic]
Could you give a bit more info on this.
I would like to upgrade the brakes in the near future but due to regulations the mazda calipers are not an option and i dont really want them

something like 1 piston calipers with arround 250/260 mm disks would be perfect .
Find all posts by this user
02-28-2012, 09:17 PM
Post: #32
My braaaakes, what about yours? [brake topic]
panda_tureno86 Wrote:Just a quick note.
For street use. The Hondas EK9 calipers are direct bolt on.

this sounds very interesting. if I remember correct some prelude has the matching disc size (282) in 4*114.3.

After doing some googling Honda Legend and NSX NA1 might also be an option.

Does anyone have the OEM AE86 setup apart and can weight (caliper with or without pads), measure (distance of mounting holes to each other and hub center, offset of disc-center to hubface) all the bits? I just recently rebuilt my fronts but forgot to do it and don't fancy taking them out again.

AE86 ex-daily
Visit this user's website Find all posts by this user
02-28-2012, 11:39 PM
Post: #33
My braaaakes, what about yours? [brake topic]
panda_tureno86 Wrote:Just a quick note.
For street use. The Hondas EK9 calipers are direct bolt on.

Is this true, I will replace mine. But how about rear? Need this badly!

1985 AE86 (ハチロク) Levin - Summer time daily driver
Find all posts by this user
02-29-2012, 02:48 AM
Post: #34
My braaaakes, what about yours? [brake topic]
I use new of everything:
OEM caliper
EBC disc
EBC pads
Steel inforced hoses

Works fine in Sweden. However havent tried them in subzero, but I have no reason to doubt it would work in cold. Smile

[Image: AEU86 AE86 - My braaaakes, what about yo...ake topic]]

Regards
Håkan

AE86 SWEDEN
https://www.facebook.com/ae86sweden
Find all posts by this user
03-01-2012, 11:23 PM
Post: #35
My braaaakes, what about yours? [brake topic]
Does the ae101 calipers and or disk fit on an ae86?
i think it would be perfect for me
255 mm disks and ae86 calipers or ae101 twin piston calipers.?
Its hard to find info on it

need to fit under 14'' wheels
Find all posts by this user
03-04-2012, 12:38 PM
Post: #36
My braaaakes, what about yours? [brake topic]
oldskull Wrote:Is this true, I will replace mine. But how about rear? Need this badly!

I think front brakes are who stops the car, rear are "only" a helper (....especially to drift Big Grin)

If it can helps anybody:
I use T3 Wilwood kit (Wilwood forged Dynalite + 280mm slotted and drilled disc), i had a problem because my brake booster - BMC are zenki...a bit small, the pedal was too soft. I replace the BMC for a Hiace's one (with starlet EP71 deposit because hiace's one touched the booster) and now is a bit hard...but works perfect!!

The wilwood BP10 pads have the "cold problem" and i'm waiting to get the EBC Yellowstuff to replace

[Image: AEU86 AE86 - My braaaakes, what about yo...ake topic]]
[Image: AEU86 AE86 - My braaaakes, what about yo...ake topic]]
[Image: AEU86 AE86 - My braaaakes, what about yo...ake topic]]

[Image: AEU86 AE86 - My braaaakes, what about yo...ake topic]]
[Image: AEU86 AE86 - My braaaakes, what about yo...ake topic]]
Find all posts by this user
04-11-2012, 06:54 PM
Post: #37
My braaaakes, what about yours? [brake topic]
bump

anyone knows any info on the honda civic ek9 front brake upgrade
Couldnt find anything on the internet about it.

do the calipers and the disks fit?
I found some from arround the 260 mm range

for the back stock calipers with the s13 adapterplate and disks looks like the way to go for me
Find all posts by this user
05-09-2012, 07:51 PM
Post: #38
My braaaakes, what about yours? [brake topic]
Do there excist any ferodo DS2500 pads for the front i can't find them?
If yes can you give me the pad number,i need them urgent Sad
Find all posts by this user
05-09-2012, 09:13 PM
Post: #39
My braaaakes, what about yours? [brake topic]
I found some EK9 caliper info here:
http://www.ek9.org/forum/brakes/16375-ca...3-ek9.html
Apparently AE86 mounting hole span is 5.5" = EK9 140mm.

[Image: AEU86 AE86 - My braaaakes, what about yo...ake topic]]
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Another suspension topic - The deal with droop Jezza_hr 27 26,837 05-31-2014 10:35 AM
Last Post: totta Crolla
  the many more 4AGZE questions topic ditn 39 38,159 05-31-2013 11:35 PM
Last Post: ditn
  Brake master cylinder for FC3S brake conversion Hachi Go 8 13,562 03-03-2011 12:06 AM
Last Post: filh
  YES, another Digital Cluster topic kikefasa 4 10,097 07-27-2009 07:13 PM
Last Post: kikefasa
  MAP vs AFM (splitted from smallport sale topic) krijn 12 10,624 10-15-2006 04:25 PM
Last Post: NoHachi

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication