Mikzu's 4A-GZE project
11-02-2008, 11:31 PM
Post: #21
Mikzu's 4A-GZE project
Jousi Wrote:Hi! Could you help me a little with ignitor connection? I have GZE ignitor but i have to wire it from ecu and on the web there are not enought info about those wires. There are those 2 connectors on the ignitor, and as far i know, smaller 2 wire connector are outputs for coils, black for coil 1,4 and blue for coil 2,3, if i am right...
But the bigger, with 5 wires are totally blank for me. In all wiring diagrams they show only three wires going to it, and the colors arent same on the ignitor side. I have colors on the upper row, left to right: brown, grey, red. Under: yellow, white.

Could you tell me what are colors (and meanings if you know) on the engine wiring loom whitch connects those colors?


Moro. Smile
here you go:

purpose / designation / color on igniter / color on wiring loom
signal, igniter -> ecu:/ IGt - / RED / black
signal, ecu -> igniter:/ IGf / GREY / black&yellow
IGd (AE101 IGa) / WHITE /black&orange
battery:/ +B / BROWN / black&orange bigger
tacho:/ TAC / YELLOW / black

coil1:/ IG1 / BLUE / black&blue
coil2:/ IG2 / BLACK / black

hope it helped you.

heres how to wire the 7mgte igniter (part: 89620-14440) to mach the gze igniter: http://www.club4ag.com/faq_and_tech_page...%20DLI.htm

280z '75
audi S4 B5 '99
KE25 '71
Find all posts by this user
11-03-2008, 04:11 PM
Post: #22
Mikzu's 4A-GZE project
Yes, that helped a lot!
Later on last evening i opened the ignitor and inside of it there where last letter in some of the wires meaning its purpose but not in all contacts.
Thank you very much!

Kiitoksia paljon! Thumbs up!
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Mikzu IV ae86 from Luxemburg+ shuttle + ke25 + 280z + chaser Mikzu IV 151 191,088 06-21-2012 08:05 PM
Last Post: bozu
  Corolla GT-Z twin cam 16 (4A-GZE) danielvanderwoude 24 28,617 10-05-2010 08:18 PM
Last Post: robokill
  Opex: AE85 3a-gze>>3a-gzte in progress opex 24 35,596 01-14-2010 06:09 AM
Last Post: opex

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication