ae86 f20c

Joined: 15 Aug 2008 Posts: 3 Location: Ireland

Doin a f20c project into my ae86 any info greatly appriciated..... Thumbsup

Posted: Thu Sep 04, 2008 8:23 pm Post subject:

There's at least 2 guys on the forum with that swap, or busy doing it. Look trhough their threads for info. I do believe there is a bolt in kit available these days for this engine.

Posted: Thu Sep 04, 2008 8:28 pm Post subject:

JSPFAB.com for that kit Wink

Ryousuke Joined: 18 Nov 2007 Posts: 138 Location: UK

Have a look at my project here.....

http://www.aeu86.org/viewtopic/1987-ae86-gtv---...in-project/t/6306

or Ians (which is further on than mine)

http://www.aeu86.org/viewtopic/ian_gs-track-drift-levin_/t/2112

or

If you just want a mounting kit to drop the motor and gearbox without cutting the tunnel out then contact JSP performance as mentioned above. You will still need to get your cross member modified as the sump fouls it. Pictures of modified cross members can be seen in my thread above.

Wataru Joined: 05 Sep 2008 Posts: 54 Location: ireland

ive built two of these, what info do ye want?
the engine isnt to bad to fit, try put it back and as low as posible, the kits are ok but i build all mine custom for the customers needs. the manifold is the most complicated part of the build! ive built four manifolds now for people, and each one is difrent and presents its own problems. ill try get a few threads up on the cars. Thumbsup