|
| Author |
Message |
Gtsi-R Takumi
Joined: 21 Jan 2008 Posts: 300 Location: Nijmegen, Netherlands
|
Posted: Mon Mar 17, 2008 3:29 pm Post subject: WANTED: switch rear glass heater & heater plate |
|
|
wanted cause mine is broken on the inside..
a switch of the rear glass heater
Partnumber: 84790-12120
also wanted couse mine is cracked..
the plate of the heater.. or how is it named..
(the plate that shows Hot (red) and Cold)
cheers,
Roel
|
|
| Back to top |
|
 |
Gtsi-R Takumi
Joined: 21 Jan 2008 Posts: 300 Location: Nijmegen, Netherlands
|
Posted: Tue Mar 25, 2008 3:19 pm Post subject: |
|
|
no one ?? come on please...
a new switch is gonna to cost me € 61,50 ex
|
|
| Back to top |
|
 |
Ivan141 Moderator
Joined: 06 Sep 2004 Posts: 4722 Location: Netherlands Z-H
|
Posted: Tue Mar 25, 2008 6:29 pm Post subject: |
|
|
These bits are hard to find... best try and ask people who are selling dashboard parts when you see them, there's always a good chance that they have the switch.
I have one on my desk in front of me, but that's there for a good reason (my car didnt have the switch anymore either.
As a temporary measure, I used a switch from an 80's starlet that just about fits in the big hole with very light modification to the switch. Up for grabs at any wrecker you can think of, and fits in your pocket so it's free too!
_________________ '84 Corolla AE86 GT coupe......daily driver
'88 Volvo 360 GLT..................trackday beater
'81 poor guy with a money-pit
FABRICA MI DIEM, PVNC!
|
|
| Back to top |
|
 |
Gtsi-R Takumi
Joined: 21 Jan 2008 Posts: 300 Location: Nijmegen, Netherlands
|
Posted: Tue Mar 25, 2008 8:16 pm Post subject: |
|
|
tat is from a P7 right ??
thanks for the tip!!
|
|
| Back to top |
|
 |
Ivan141 Moderator
Joined: 06 Sep 2004 Posts: 4722 Location: Netherlands Z-H
|
Posted: Wed Mar 26, 2008 12:08 am Post subject: |
|
|
Yeah it's the P7... I could take mine out of my car for you since I wont be needing it any more (will be needing a blind-panel for the big hole though), but your better off just going to your local wrecker and pocketing it. I've tried most other 80's toyota switches, but havent found anything else that worked.
_________________ '84 Corolla AE86 GT coupe......daily driver
'88 Volvo 360 GLT..................trackday beater
'81 poor guy with a money-pit
FABRICA MI DIEM, PVNC!
|
|
| Back to top |
|
 |
Gtsi-R Takumi
Joined: 21 Jan 2008 Posts: 300 Location: Nijmegen, Netherlands
|
Posted: Wed Mar 26, 2008 11:01 am Post subject: |
|
|
Pics of the switch..
If that switch is working.. and you are willing to send it
I am looking for some blinds also..
|
|
| Back to top |
|
 |
Gtsi-R Takumi
Joined: 21 Jan 2008 Posts: 300 Location: Nijmegen, Netherlands
|
Posted: Wed Mar 26, 2008 8:09 pm Post subject: |
|
|
also some good ideas for the heater pannel ??
couse New it is not to be ordered
cheers Roel
|
|
| Back to top |
|
 |
banpei Site Admin
Joined: 15 Aug 2004 Posts: 7627 Location: Hilversum
1982 Toyota Carina
|
Posted: Wed Apr 02, 2008 9:45 pm Post subject: |
|
|
You mean this panel?
If so, then one is for sale here:
http://www.aeu86.org/viewtopic/a-bunch-of-parts...8no-56k%29/t/6426
_________________ Sailor Hachi says: "hachini kawatte oshiokiyo" (In the name of the hachi: I'll punish you!)
1982 - TA60 Carina 4dr sedan - family cruiser
2004 - AEU86 dot ORG - daily domain
|
|
| Back to top |
|
 |
DJexor Moderator
Joined: 24 Oct 2004 Posts: 1405 Location: Netherlands, Den Haag
1985 Toyota Corolla AE86 (early Levin)
|
|
| Back to top |
|
 |
Gtsi-R Takumi
Joined: 21 Jan 2008 Posts: 300 Location: Nijmegen, Netherlands
|
Posted: Thu Apr 03, 2008 10:19 am Post subject: |
|
|
@ banpei: that one is also damaged.. but I respond on that ad annyway;)
@ Djextor, that is a RHD one that he has got for sale..
seems that there are no peices complete intact to find...
But I got something nice in my mind..
try to make a covver plate of my own of brushed Alu with stickers on it or so..
|
|
| Back to top |
|
 |
jamiemirror Bunta
Joined: 04 Jan 2005 Posts: 1795 Location: Sofia, Bulgaria
1984 Toyota Corolla AE86 (early Levin)
|
Posted: Thu Apr 03, 2008 1:29 pm Post subject: |
|
|
I have good but not perfect heater panel.
If you still want it - can make a pics.
|
|
| Back to top |
|
 |
Gtsi-R Takumi
Joined: 21 Jan 2008 Posts: 300 Location: Nijmegen, Netherlands
|
Posted: Thu Apr 03, 2008 4:59 pm Post subject: |
|
|
yes please!!
|
|
| Back to top |
|
 |
Sanity Clause Wataru
Joined: 14 Mar 2005 Posts: 57 Location: Addlestone, Surrey, UK
|
Posted: Tue Apr 08, 2008 10:37 pm Post subject: |
|
|
You can buy a replacement facia plate for the heater control panel from Toyota.
I replaced one on a Levin about a year or so ago. It cost about 8GBP, if I remember correctly.
There are quite a few different versions/colours of the facia.
To find the correct part number for your car, have a look in the Toyota EPC and keyword search for "Heater", and then "Plate, Heater Control Name". Alternatively key 81941 into the Part Name Code box and hit F10.
I used the Kouki UK spec version (p/n 55519-12021). A LHD car will be different.
It's little more than a piece of stick-on plastic.
_________________ www.AE86imports.0catch.com
|
|
| Back to top |
|
 |
Gtsi-R Takumi
Joined: 21 Jan 2008 Posts: 300 Location: Nijmegen, Netherlands
|
Posted: Wed Apr 09, 2008 8:17 am Post subject: |
|
|
oke..
then I will go after that onece more... LHD &RHD is different!!
but the number I got was / is
55519-12060 /
55519-12061
but they vould not see if it was to be ordered..
are there difference between the kouki and the zenki?
cheers Roel
|
|
| Back to top |
|
 |
Sanity Clause Wataru
Joined: 14 Mar 2005 Posts: 57 Location: Addlestone, Surrey, UK
|
Posted: Wed Apr 09, 2008 3:52 pm Post subject: |
|
|
Is it LHD? Which year and month (or frame number) is it?
_________________ www.AE86imports.0catch.com
|
|
| Back to top |
|
 |
Gtsi-R Takumi
Joined: 21 Jan 2008 Posts: 300 Location: Nijmegen, Netherlands
|
Posted: Wed Apr 09, 2008 4:06 pm Post subject: |
|
|
LHD
1984 Levin Coupe
quered trough chassisnumber
|
|
| Back to top |
|
 |
Sanity Clause Wataru
Joined: 14 Mar 2005 Posts: 57 Location: Addlestone, Surrey, UK
|
|
| Back to top |
|
 |
Gtsi-R Takumi
Joined: 21 Jan 2008 Posts: 300 Location: Nijmegen, Netherlands
|
Posted: Wed Apr 09, 2008 8:02 pm Post subject: |
|
|
no it is a origional dutch one!
chassisnumber:
JT1S0AE8600058355
|
|
| Back to top |
|
 |
Sanity Clause Wataru
Joined: 14 Mar 2005 Posts: 57 Location: Addlestone, Surrey, UK
|
Posted: Wed Apr 09, 2008 8:58 pm Post subject: |
|
|
55519-12060, (subs) 55519-12061 should be correct. Looks like you could also use 55519-12030 (subs) 55519-12032, but I think that one has the hole for A/C control. See below.
Also a pic of 55519-12021, which is for RHD. Is it different?
_________________ www.AE86imports.0catch.com
|
|
| Back to top |
|
 |
Gtsi-R Takumi
Joined: 21 Jan 2008 Posts: 300 Location: Nijmegen, Netherlands
|
Posted: Wed Apr 09, 2008 9:17 pm Post subject: |
|
|
the plate heater control name on the picture is just the other way around!!
but the rest is the same!!
it should be like the pic of banpei!
|
|
| Back to top |
|
 |
Sanity Clause Wataru
Joined: 14 Mar 2005 Posts: 57 Location: Addlestone, Surrey, UK
|
Posted: Wed Apr 09, 2008 9:36 pm Post subject: |
|
|
If you don't have the A/C buttons, I would go for 55519-12060, (subs) 55519-12061.
_________________ www.AE86imports.0catch.com
|
|
| Back to top |
|
 |
Gtsi-R Takumi
Joined: 21 Jan 2008 Posts: 300 Location: Nijmegen, Netherlands
|
Posted: Thu Apr 10, 2008 8:37 am Post subject: |
|
|
owkee thanx, I hope to drop by the dealer this afternoon and see what we wil come up to!!
and i will ask for a copy of their EPC couse mine is usseless at the moment couse I dont have my hachi in it...
cheers Roel
|
|
| Back to top |
|
 |
Sanity Clause Wataru
Joined: 14 Mar 2005 Posts: 57 Location: Addlestone, Surrey, UK
|
|
| Back to top |
|
 |
Gtsi-R Takumi
Joined: 21 Jan 2008 Posts: 300 Location: Nijmegen, Netherlands
|
Posted: Wed Apr 16, 2008 1:16 pm Post subject: |
|
|
I was @ the dealer yesterday,
55519-12060, (subs) 55519-12061.
was about € 60,- ex
55519-12030 (subs) 55519-12032
about €17 ex
so I tried to order the last!
But there is no dilevery date in the system witch points on that it is no longer to be ordered he said..
the RHD (55519-12021 ) was able to order.. strange...
But he tried to order it annyway, hope to hear from him soon ..
and Else I have to make my own out of aluminium..
But then I need some stickers..
Is something like that to be ordered? cause custom stickker will cost me about 60 euro's..
and I think that this alu plate will look great.. only no lightning annymore then ..
|
|
| Back to top |
|
 |
Sanity Clause Wataru
Joined: 14 Mar 2005 Posts: 57 Location: Addlestone, Surrey, UK
|
Posted: Wed Apr 16, 2008 2:48 pm Post subject: |
|
|
I wonder why the big price difference? They aren't that different.
How about trying a US Toyota dealer? I can't check if the p/n is the same, as I don't have EPC US edition.
_________________ www.AE86imports.0catch.com
|
|
| Back to top |
|
 |
|