Stativ

Iketani Joined: 25 Apr 2005 Posts: 42

Hej

Jeg skal have lavet et stativ

Men hvor stort skal det vaere for at det kan holde og ikke vaelter.

tager karossen paa nogen maade skade kan man komme til at bukke det?

Hvis i har nogle billeder og maal maa i meget gerne poste dem

Tak for hjaelpen

English:
I'm building a rotisserie. What dimensions should it be to make it strong enough and make sure it doesn't tip over.

Will the chassis be damaged or could you bend in any way?

If you got any pictures or messurements please post up. Thanks!

Takumi Joined: 06 Mar 2006 Posts: 256 Location: Wroclaw

Jag har gjort en snabb skiss. Du måste nog stödja profilen som länkar ihop båda ramarna från var och en sida eller hitta på något annat. Ramarna är i alla fall ritade enligt ae86 mått. Hoppas detta blir till nån hjälp.

Posted: Thu Sep 20, 2007 8:57 am Post subject:

(my swedish is really bad so I'll reply in english, sorry)

This is a pretty good rotisserie for a car chassis and it's adjustable so it can be used for different cars;

http://www.mts.net/~hpokrant/Restoration_Tips/1...ie/Rotisserie.htm

The construction plans are also pretty detailed so building one shouldn't be too hard.

Posted: Thu Sep 20, 2007 9:16 am Post subject:

You guys rock !!!!!

I was looking after of a plan like this.

Thank you very very much Thumbsup

Posted: Thu Sep 20, 2007 10:06 am Post subject:

Nice link Firehawk Exclamation

The rotisserie I used look like this:

This was nicely balanced and I could turn it single handed Thumbsup

If you want to leave the rear end and front suspension you might want to make it a bit stronger...

WeRz, hvis karosseriet tager skade er det ikke værd at lave (Jeg tror ikke det kan ske)... Du skal naturligvis ikke skære alle vangene af mens karossen hænger i stativet, men det giver jo sig selv Smile

English: If the chassis gets damaged its not worth saving, but I don't think you have to worry about that. Just don't cut all the all the side members at once Wink

Posted: Thu Sep 20, 2007 12:21 pm Post subject:

The rotisserie I made:

Takumi Joined: 06 Mar 2006 Posts: 256 Location: Wroclaw

nice link firehawk! Thumbsup

Posted: Fri Sep 21, 2007 8:32 am Post subject:

please convert it to english and make it a sticky in the tech session. This is helpfull for everyone!

Posted: Fri Sep 21, 2007 9:12 am Post subject:

I hope Cannabolic will translate his reply... I'm not quite sure that I'm able to do it properbly Smile

Takumi Joined: 06 Mar 2006 Posts: 256 Location: Wroclaw

I just made a quick drawing taking in mind hachi's dimensions. there's a lot of other stands that have hachi's on'em. I've made mine but haven't put my hachi on it yet.

sticky Thumbsup

firehawks link is very good