nzae86's TRD ae86 N2 Race Car Project 2,

[nzae86]

Another update on a bit of work done , a window demister is essential in this country when racing in the rain so the standard heater box had everything inside it removed and modified the internal flow with light weight aluminum sheet, then attached a lightweight blower from a marine shop to push the air through it


The intake of the blower will take the air from the original place that the normal heater used.All this has ended up very light .
I also started on the lay out for the wiring , as the Stack dash is a stand alone unit ,this simplified the dash wiring .The standard wiring loom was stripped apart to find anything useful.(front, dash, and rear loom)

This is what I threw away




And this is what I kept .



I have gone for a local built engine management that has some great features but will only be using fuel and spark.



My engine builder is very familiar with this EMS so the end result should work well.

Now just to work out where everything goes


And a very high power battery without a lot of weight


Wiring can be a bit frustrating as a lot of planning is required to keep everything as simple as possible , with wires running the tidiest way possible