Kida AE86 project finally under way [20V pwrd]
04-13-2007, 11:30 AM
Post: #6
 
I will start with it tomorrow evening, but my main worry is now they have the pump wired for the MAP sensor, because the COR needs ground on pin 4 to open up for the fuel pump. On the 16v i believe that is provided by the start switch when cranking and by the AFM when air is flowing. MAP would have the same reading when the engine is not runnign and on WOT. There is, i believe, a pin on the ECU that is supposed to do the job, but that will be checked. Damn, my wiring sucks =/
Find all posts by this user


Messages In This Thread
[] - domi - 04-09-2007, 03:20 AM
[] - Mux213 - 04-09-2007, 10:00 AM
[] - domi - 04-12-2007, 08:47 AM
[] - Ivan141 - 04-12-2007, 06:50 PM
[] - domi - 04-13-2007 11:30 AM
[] - Ivan141 - 04-13-2007, 04:34 PM
[] - domi - 04-20-2007, 12:46 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Krullibulls Ae86 BEAMS is the only way krullibull 86 81,213 05-07-2019 09:35 PM
Last Post: banpei
  Its in Finally Alex170984 3 5,265 07-16-2013 04:01 PM
Last Post: Alex170984
  AE86 From Down under.New pics Pg5 20vPETE 143 118,365 01-14-2013 01:17 PM
Last Post: Eircamae86
  My 20v booter project diggerdolan 2 5,103 10-01-2012 04:45 PM
Last Post: zenki
  86er's Track rebuild N2.??? Finally an update page 8 86er 191 244,308 03-25-2012 10:05 AM
Last Post: bozu

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication