AEU86 Shop

[Mux213]

Hey NoHachi,

As for the Konis, I agree with you, the quality is such that you really have to use them wrong to do damage to them, but I've seen it happen. Point I was trying to make is that you need to be carefull in judging reactions you read on these items. There are so many people out there that give bad ratings to products not cause the product is bad, but because those people aren't profesionals and are incorrectly using the product and not all products handle such a situation equally (which if you are buying such a product and you are not a profesional yourself, is important information n on the less). The fact that a product breaks when improperly used doesn't necesairily mean its a bad product. It may perform admirably when used properly and while you read some bad things about AGX, there are also ALOT of good stories out there.

In the end though, we'll judge it once we have some actual _experience_ with them.

As for shipping, yes it would be nice if we could do it this way, but you try and find enough buyers who want to cash out this amount of money for parts and shipping at the same time. Its a logistics nightmare and you'll find it hard to get the people together.

Your best bet is to lift along with someone who's already shipping large amounts of goodies. And lets face it, last time WE shipped a big pallet and offered if anyone would want to order some additional parts that went along for the ride virtually at no shipping costs, nobody reacted.

Its why me and Banpei have desided that we'll purely work on buying parts, shipping them to NL and then trying to sell them when we have them in hand. We personally run a bigger risk, but it solves alot of headaches (though this shipping delay is making me loose sleep ).

NoHachi Wrote:Hi Mux,

Jup, that could be issue..I don't know. But if I use your own definition, and look at all the reports surrounding e.g. Koni's, then they seem to be fairly idiotproof. Anyway, its a new adjustuble option in Europe, at a new price and I am all for extra options! (and I might need an extra rear shock as a replacement)

Just as a hunch, if you ever speak to Dick Hoekendijk again, try and ask him what his connections are within Billstein. I know he had a custom valved set made right at the factory. Maybe there is a way of becoming a reseller or getting a similar "killer deal" like you are working on with koni.

Finally, I think everyone here at aeu86 would be absolutely thrilled if some space could be found somehow, somewhere in a container to ship larger items at reasonable costs. I'm thinking of the PASS-bodykits at the moment and possibly some other "heavy" packages that are just too expensive too ship via ordinary channels. There must some shipping agent somewhere that is willing to ship a single pallet:

E.G. 1 6m container, shipped from the US is ~ 1000$ or 800E.
1 containerfloor will house no more then 12 Euro pallets = 800/16 = 67E/pallet
Size restriction of one pallet are 120x80x~200. Which should be enough to send several kits over if packaged handily.
Price hike of 100% for profit (somewhere) and you end up with 140 to 150E shipping costs. Now that would be nice.