Ivan's coupe: roof stuccowork

[Striker]

Hey Ivan,

Now that looks very familiar in some kind of way.... I just did the same thing when I decided to opt for a oil catch can myself, I also looked at the Senseo container, but found that if one put some vacuum on it it would collapse under presure, as I want to keep the PCV function in the 4age and have a drain back to the sump. I opted for this.

I'm still thinking about how to mount it nicely, how did you do it, or planned to.




the brass stuff is just normal Gas and water plumbing stuff cheap and .

It's a very rare Heineken alloy bottle Called "paco" with made out of very thick alloy material, some 1mm pressed plate, I put 10bar negative presure on it out of a testing vacuum pump and it held whitout problem,

Don't get me wrong I also do have a senseo at home for during building cars, however after building cars I want BEER !

grtz Thomas

good luck with your's!

ps, quick offtopic question, can I take a good rpm signal form the - on the ignition coil? or do I need to splice in somewhere in the loom, if so which colour or abreviation has this wire got?