Adam's volvo 242 nonsense

[Ivan141]

First off: congratulations on the little boy!
Nice to see some progress.... since I've bought a decent action cam I've been pondering if I should film some of my own garage
exploits but it kinda costs a lot of time to do it right, and who wants to see me drinking beers anyway?

One piece of advice: try to keep your work divided into mini projects. Bit late for this I know, but maybe someone will benefit from it.
By this I mean if you need to weld a sill, dont strip the whole car down to a bare chassis first if it's not required for the job at hand.
Just start focusing on one job and don't start another until it is finished.
This way you dont fall into the trap of the bottomless pit of remaining work looming over you. And you forget less about how things went together.
That being said, if you plan to have the whole chassis blasted or dipped before commencing work then there is no way around stripping everything.
In my experience with these old swede-tanks, they dont really need it. The metal is thick enough that they are easy enough to just patch up.
Also always consider using ready made patch panels if they are available (klokkerholm stuff).. can really save time with complicated panels.