JDM trueno not starting. need help!
03-10-2017, 01:43 AM
Post: #7
RE: JDM trueno not starting. need help!
no rpm signal probably means the pickup in the dizzy is knackered, of you have a break in the cabling between there and the ECU (maybe where it runs through the timing belt cover). Can't imagine that the code 4 temp has anything to do with your problems.

No rpm signal also means no injector pulse. Some of the older ecu's also used the rpm signal as a fuel pump cut, so in a crash when the engine stopped the fuel pump would shut off as well.

Check the resistance of the coils in the dizzy pickup, should be 140 - 180 ohm.
Find all posts by this user


Messages In This Thread
JDM trueno not starting. need help! - kazi - 03-09-2017, 03:54 PM
RE: JDM trueno not starting. need help! - Nakilad - 03-10-2017 01:43 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Need help identifying this! takumi_mt 4 245 04-05-2024 09:17 AM
Last Post: takumi_mt
  TRD ECU need help ps13michi 5 2,749 02-18-2022 10:42 AM
Last Post: ps13michi
  lntermittent starting totta Crolla 6 2,978 08-31-2021 06:21 PM
Last Post: totta Crolla
  Starting problems 4-AGE kouki Hanzo 3 2,109 08-31-2021 06:20 PM
Last Post: totta Crolla
  Need some help DJexor 4 4,809 03-13-2018 05:37 PM
Last Post: pack

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication