hachiroll`s rust&lowcompressionrolla project

[fax0815]

Exhaust valves take some time to clean, no need to be gentle with them.
I takes me about 15-20 min to get them from your state to mirror finish.
So if your´e going to throw them away I´d like to take them!!!

This is going to cost some serious money if you really want to buy everything new. Maybe a good 2nd hand head with good valves might be better?

Anyway, not sure what your plans are, but stock diameter valves are allright for most applications.
As for supertech, the do nice valves. I could not find a different company selling valves for 4AGE´s, not even Mahle.


I bought my springs from HKS they´re only like 125€ from fensport:
http://www.fensport.co.uk/Parts/Model_3/...ry_12/1248

I bought 3 of these sets, the´re allright, but I´d advise to buy a genuine Toyota headgasket (44€).

http://www.ebay.com/itm/85-89-TOYOTA-COR...2eb86f90d3

This set also includes the head screws, but I´d rather buy them here in Europe to save customs tax.
Just take a look at ebay motors.com there are plenty of fulll gasket set for 4age, look at the pictures/ description and make sure they´re branded "ERISTIC", I even think eristic gaskets runs a ebay store...

edit:
http://stores.ebay.com/eristicgaskets