4AGE Silvertop torque setting
07-31-2009, 01:56 AM
Post: #1
4AGE Silvertop torque setting
Hi everyone

Can I use the blacktop engine torque setting on my silvertop? Such as Placing back te Connecting Rod Cap and etc?
Visit this user's website Find all posts by this user
07-31-2009, 03:59 AM
Post: #2
 
Just checked now and both silver and blacktop torque settings are the same:

60Nm for the crank bearing caps

29Nm for the rods caps

9,5Nm for the rear retainer

45Nm for the knock sensor

14Nm for the water pump

75Nm for the flywheel

30Nm +90º + 90º for the head

17Nm for the cam caps

Still have to cross references with the 16v but from what I remember its almost the same (only sure about the head and crank caps)

[Image: capturar01.jpg]
Visit this user's website Find all posts by this user
07-31-2009, 06:12 AM
Post: #3
 
Many thanks for your help!!!
Visit this user's website Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  stock injector deadtime for 4age 20v silvertop/blacktop injector ditn 1 583 02-20-2016 11:48 AM
Last Post: Bean
  torque setting head cylinder bolts izanagi 1 729 05-29-2015 01:23 AM
Last Post: oldeskewltoy
  [Tutorial Video] Setting 4A-GE Ignition Timing Homem Bomba 0 668 04-21-2014 02:41 PM
Last Post: Homem Bomba
  20v silvertop exhaust manifold on 16v 2nd version tvis motor Apsogos 17 7,324 11-22-2012 11:15 PM
Last Post: Apsogos
  Need help finding an axle that can handle high hp/torque kevcov 5 1,861 04-17-2011 10:50 AM
Last Post: Prime86

Forum Jump:


User(s) browsing this thread:

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication