F/S 4.778 R&P sets AE86
06-30-2009, 03:30 PM
Post: #23
 
Can you let me know the costs to build up a 4.78 setup inc all the build up parts, shipped to me in the UK?

My back axle sounds like its going to blow up under load and rattles and bangs as you come on and off the power, so i think the ring and pinion must be shot. It looks fine visually but we've tried swapping everything else.

regards

Matt Jenkins
Find all posts by this user


Messages In This Thread
[] - robokill - 06-19-2008, 09:45 AM
[] - banpei - 06-19-2008, 10:10 AM
[] - aussiefan - 06-19-2008, 06:54 PM
[] - apardal - 06-20-2008, 11:44 AM
[] - WeirPerformance - 06-21-2008, 03:06 AM
[] - cannabolic - 09-01-2008, 04:03 PM
[] - WeirPerformance - 09-03-2008, 05:55 AM
[] - ToyotaTs - 09-03-2008, 10:51 AM
[] - gjuro - 09-03-2008, 11:09 AM
[] - WeirPerformance - 09-03-2008, 03:57 PM
[] - WeirPerformance - 09-03-2008, 03:59 PM
[] - filh - 09-08-2008, 11:35 PM
[] - Fallguz - 09-09-2008, 09:49 PM
[] - WeirPerformance - 09-09-2008, 10:00 PM
[] - filh - 09-10-2008, 11:16 PM
[] - WeirPerformance - 09-11-2008, 10:29 PM
Solid spacer etc. (AE86) - totta Crolla - 10-28-2008, 09:03 PM
[] - Bubble_Drift - 06-12-2009, 07:39 PM
[] - WeirPerformance - 06-12-2009, 09:50 PM
[] - peter møller - 06-23-2009, 10:04 PM
[] - Team_Dandism - 06-30-2009 03:30 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication