82mm Stock compression Pistons
11-24-2021, 01:07 AM
Post: #1
82mm Stock compression Pistons
Hi!

I'm in the process of getting my 4AGE back in stock form and I'm trying to reuse my original block that had 81,5mm wiseco pistons and 20k miles after had some kinks on them that eventually scratched the cylinder bores.

I can either get some sleeves and stock pistons or go with a 82mm piston setup. I'm not fond of putting new sleeves on 4AGE's, but i'm finding it very difficult to get stock compression pistons with 82mm of bore.

Does any of you know if there are brands that can get me to where I want to be?

The goal is to build a stock 4AGE for daily use. Good engine blocks are getting each day more difficult to find and I would also like to keep mine, as it is a 7 rib and the 40mm rod journal crankshaft is ok.

Any input will be appreciated!
Find all posts by this user


Messages In This Thread
82mm Stock compression Pistons - apardal - 11-24-2021 01:07 AM
RE: 82mm Stock compression Pistons - r.ave - 11-24-2021, 03:31 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Digital speedometer on stock dashboard FanIsHere 0 921 11-09-2022 01:36 PM
Last Post: FanIsHere
  20v Silvertop stock ignition timing and fueling maps Lykowsky 5 11,736 07-18-2019 03:52 PM
Last Post: oldeskewltoy
  working out compression ratios kazi 2 3,107 07-16-2019 08:22 PM
Last Post: oldeskewltoy
  Most stock-resembling exhaust for the AE86? DaLanZhu 4 4,834 03-24-2019 04:10 PM
Last Post: oldeskewltoy
  Small Port 10.3 Pistons Alex170984 1 4,048 10-25-2016 09:18 PM
Last Post: oldeskewltoy

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication