Brake Bias Questions

[mad.matt]

Hi Guys

I have a predicament.
I'm running FD3s Calipers on the front with Mini Cooper S Discs but standard AE86 discs on the back.

I was planning on running a high Mu (Project Mu HC+) pad on the back that bites from cold (as I'll be using it for drifting) but I also plan on doing the odd track day in it, so need a pretty good pad up front.

Front tyres will always be a Group 1B/S tyre so tyre grip isn't really a concern.

My concern is, if I go for the same pad front/back, it might be too aggressive on the front for track (helps to pivot the rear if drifting though).

So, I thought of my options.
A - Run the same pads front/back but put in a Bias adjuster.
B - Run slightly less bitey (Ferrodo DS2500) pads on the front than the back to balance out the braking a bit.
C - Run slightly less bitey pads on the front than the back to balance out the braking a bit BUT with a brake bias adjuster too.

Any experience would be really handy

Many Thanks,
Matt