|
OST-045: 5AGTE... again ;)
|
|
03-11-2018, 12:33 AM
Post: #15
|
|||
|
|||
RE: OST-045: 5AGTE... again ;)
another forum Wrote:Amazing work as always. How the heck do you get those shallow coolant passages around the chambers so clean? oldeskewltoy Wrote:One of the costs.... I have each head cleaned and pressure checked at a machine shop. In this case the head did come to me cleaned already, but I still had it checked for its pressure holding capability. another forum Wrote:The machine shop that does the work is seriously impressive then. I took two heads so far to two different machine shops and neither could get the coolant passages as spotless as this. Not all of the heads I work have this "pretty" of a finish from cleaning... BUT... all heads leaving are machined so that you can read in their reflection... OR more appropriate - fully ready for a metal head gasket! ![[Image: AEU86 AE86 - RE: OST-045: 5AGTE... again ;)]](http://ost.ebeans.ch/albums/userpics/10005/surface_of_head_after_machining3.jpg "AEU86 AE86 - RE: OST-045: 5AGTE... again ;)") More to come........ 
Dan - You can |  .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| (Catching up) OST-086 MM: Built for Mario | oldeskewltoy | 2 | 1,842 |
10-28-2022 08:23 AM Last Post: decryphe |
|
| OST-093: My, My, Mystery | oldeskewltoy | 10 | 3,113 |
09-18-2022 02:19 AM Last Post: oldeskewltoy |
|
| (Catching up...) OST-085: 7AG Big Valve build w/Cat Cams 262 9.0mm lift cams | oldeskewltoy | 5 | 2,254 |
09-09-2022 09:07 PM Last Post: Vaptor |
|
| (Catching up...) OST-083: Salvage operation | oldeskewltoy | 2 | 1,508 |
07-11-2022 08:32 PM Last Post: banpei |
|
| (Catching up...) OST-082: Nope, never again... at least not without all the parts | oldeskewltoy | 0 | 1,221 |
06-28-2022 09:17 PM Last Post: oldeskewltoy |
|
User(s) browsing this thread: 1 Guest(s)