|
Shim size for AM cams
|
|
12-18-2017, 05:34 PM
Post: #5
|
|||
|
|||
|
RE: Shim size for AM cams
a LOT (your need for shim under) depends on the valve springs!
If you have enough spring to follow the cam, then shim over works just fine (albeit it is heavier). The issue with shim over is, ***IF*** the spring doesn't follow the cam, but instead begins to "bounce" - THEN you have a problem! The shim being on top is the easiest piece to dislodge. If it becomes dislodged, then it can pop out causing catastrophic damage. There is no lift limit, the problem/issue is more based on rpm levels (the spring can't respond quickly enough) Dan - You can |  .... OR you can ask for help!!!OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991 |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Shim size for AM cams - kazi - 12-16-2017, 12:53 AM
RE: Shim size for AM cams - Project D - 12-16-2017, 09:24 AM
RE: Shim size for AM cams - kazi - 12-16-2017, 07:47 PM
Shim size for AM cams - Bean - 12-16-2017, 06:10 PM
RE: Shim size for AM cams - oldeskewltoy - 12-18-2017 05:34 PM
|
| Possibly Related Threads... | |||||
| Thread | Author | Replies | Views | Last Post | |
| 20V shim micrometer | oldeskewltoy | 7 | 8,237 |
12-22-2017 12:23 AM Last Post: Project D |
|
 |
Hub size | kazi | 5 | 8,602 |
06-09-2017 10:06 PM Last Post: kazi |
| Toda Cams | Alex170984 | 7 | 7,780 |
02-11-2017 05:50 PM Last Post: Alex170984 |
|
| 20V cams - CATCAMS vs KELFORD? | Grant | 19 | 36,683 |
11-19-2015 07:45 AM Last Post: hachirokkos |
|
| Camshaft sprocket bolt size? | harkes | 1 | 4,241 |
07-03-2015 12:41 PM Last Post: Dave W |
|
User(s) browsing this thread: 1 Guest(s)