torque setting head cylinder bolts
05-29-2015, 01:23 AM
Post: #2
RE: torque setting head cylinder bolts
(05-28-2015 05:04 PM)izanagi Wrote:  Hi all,
I would like to change the head gasket of my AE92 4AGE TVIS Red Top (early 88-89 Big Port) engine.

I saw in the manual that the torque setting for the head cylinder bolt is (29 Nm + 90° + 90°) but I saw on internet that exists a new manual with the setting (60 Nm + 90° + 90°), it makes a big difference.

What is correct ?

Thanks for your help

Kevin


Were the specifications from a factory service manual update?? Where did you get this information??

Dan -

You can |Sad .... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991
Find all posts by this user


Messages In This Thread
RE: torque setting head cylinder bolts - oldeskewltoy - 05-29-2015 01:23 AM

Possibly Related Threads...
Thread Author Replies Views Last Post
  4AGE cylinder head plug removal Ivan141 5 1,075 09-30-2023 09:47 PM
Last Post: Ivan141
  Head bolts: You decide..... oldeskewltoy 8 8,627 11-11-2020 06:33 PM
Last Post: oldeskewltoy
  Brake advice - master cylinder mannix20vt 12 12,557 08-21-2017 03:21 PM
Last Post: Project D
  Torque settings kazi 4 5,313 03-28-2017 12:15 AM
Last Post: kazi
  ring gear bolts DJexor 3 4,847 12-26-2016 10:56 PM
Last Post: totta Crolla

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication