outer tie rods for ae86,oem or T3
12-07-2013, 09:01 PM
Post: #7
 
I've had the t3 setup for a few years now with no issues, but my car rarely sees daily use. Every component in the kit is a lot beefier than oem. My only gripe is they chose to use a locknut with a nylon insert instead of a castle nut/cotter pin.
Find all posts by this user


Messages In This Thread
outer tie rods for ae86,oem or T3 - ditn - 12-06-2013, 10:48 PM
[] - fax0815 - 12-07-2013, 04:26 AM
[] - jasper - 12-07-2013, 08:58 AM
[] - ditn - 12-07-2013, 03:28 PM
[] - totta Crolla - 12-07-2013, 03:33 PM
[] - ditn - 12-07-2013, 05:01 PM
[] - Deuce Cam - 12-07-2013 09:01 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  crank, rods & pistons Alex170984 4 5,378 12-12-2014 05:31 PM
Last Post: Alex170984
  is it possible to get new outer 1/4s for a two door hachi ? adamsaiyad 1 3,465 02-09-2011 10:36 PM
Last Post: adamsaiyad

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication