CJ's AE86 project
06-23-2008, 11:08 PM
Post: #41
CJ's AE86 project
Engine has been fully rebuilt:
81.5 cylinder porting
11:1 Arias forged pistons
Pauter Chrome-Moly rods
TRD MLS headgasket
New OEM Toyota crankshaft
ACL Race rod and main bearings
Fidanza light-weight flywheel


First impressions: nothing fancy Wink As a movie characters says: "Well, it can move..." I am using a Megasquirt setup and therefore the car needs further adjustments. I believe i can achieve much better results and will try to run a couple of dynos. Meanwhile will try to add about 1000 "mild" miles on the dashboard. :wink:

I deeply appreciate the help of my friends - bad_dog & Co. Thumbs up! Respect! Thumbs up!

[Image: AEU86 AE86 - CJ's AE86 project]

[Image: AEU86 AE86 - CJ's AE86 project]

[Image: AEU86 AE86 - CJ's AE86 project]

[Image: AEU86 AE86 - CJ's AE86 project]

[Image: AEU86 AE86 - CJ's AE86 project]

[Image: AEU86 AE86 - CJ's AE86 project]

[Image: AEU86 AE86 - CJ's AE86 project]

[Image: AEU86 AE86 - CJ's AE86 project]

[Image: AEU86 AE86 - CJ's AE86 project]

[Image: AEU86 AE86 - CJ's AE86 project]

[Image: AEU86 AE86 - CJ's AE86 project]

[Image: AEU86 AE86 - CJ's AE86 project]

1984 Toyota Corolla 4AGE 20v
2007 Subaru Impreza STi
Find all posts by this user
06-23-2008, 11:29 PM
Post: #42
CJ's AE86 project
Here is a movie from the first test runs:

http://www.youtube.com/watch?v=9Ri1e7AtJfQ

Although trying to perform a drift, the car feels very sticky and i find it hard to achieve high angle without using the e-brake. It definitelly needs further engine management tuning.

1984 Toyota Corolla 4AGE 20v
2007 Subaru Impreza STi
Find all posts by this user
06-24-2008, 11:53 AM
Post: #43
CJ's AE86 project
Nice one, I just can't get enought of that ITB sound at full throttle Hurray!

DRIFT.HR
Find all posts by this user
06-24-2008, 01:26 PM
Post: #44
CJ's AE86 project
Nice photoshopping Big Grin Big Grin

1982 - TA60 Carina 4dr sedan - fun cruiser
1983 - AE86 Sprinter Trueno - import project
2013 - Honda Civic sport - daily driver
2004 - AEU86 dot ORG - daily domain

Support our forum, buy from the AEU86 shop:
[Image: AEU86 AE86 - CJ's AE86 project]
Visit this user's website Find all posts by this user
06-25-2008, 05:40 PM
Post: #45
CJ's AE86 project
cj, what's the weight of that fidanza? Would be great if you had part number too. Reason I'm asking is I bought one (4kg) for 4AGE smallport but since it's plug&play I put it on my blacktop (stock engine). There are problems with it however (at least I think flywheel is causing it). During 1000-3000 RPM I can't accelerate at all -- no matter the gear. The car just stalls. At around 4500-5000 RPM it goes as it should.

Cheers Hurray!

[Image: AEU86 AE86 - CJ's AE86 project]
Visit this user's website Find all posts by this user
06-25-2008, 08:31 PM
Post: #46
CJ's AE86 project
Those trumpts are.. I want my 20v too.
But can i ask you, is there reason why you changed the conrods? Already the stock are overkill and the pauters are for serious boost power. Are they much lighter as the stock ones?

http://www.86ers.org
All the hachies that Daytona can only dream about.
Find all posts by this user
10-09-2008, 02:14 PM
Post: #47
CJ's AE86 project
Hidraulic handbrake:
[Image: AEU86 AE86 - CJ's AE86 project]

ACT Cluthc kit: Heavy Duty Plate & Performance Street Disk
[Image: AEU86 AE86 - CJ's AE86 project]

1984 Toyota Corolla 4AGE 20v
2007 Subaru Impreza STi
Find all posts by this user
10-23-2008, 06:22 PM
Post: #48
CJ's AE86 project
Quaife quick steering rack installed today. Smile Before putting it on i added 2 more teeths to it and also modded the inner tie rods for more angle. Haven't really tested the new setup, but did notice that significant more power is requireded to turn the wheel. Looks like i'll have to attend the gym more often Tongue

Quaife quick steering rack (sorry, no pics from the installing):
[Image: AEU86 AE86 - CJ's AE86 project]

1984 Toyota Corolla 4AGE 20v
2007 Subaru Impreza STi
Find all posts by this user
10-23-2008, 06:57 PM
Post: #49
CJ's AE86 project
Cj, any improvement on the maximum steering angle with this rack?

Drifting - best fun you can have in your car with your pants on!
Visit this user's website Find all posts by this user
10-23-2008, 10:12 PM
Post: #50
CJ's AE86 project
ZaX Wrote:Cj, any improvement on the maximum steering angle with this rack?

Quaife QSR's don't improve angle. They're the same length as stock ones.

They just improve the responsiveness of the steering as it takes less steering wheel movement vs rack movement.

Andrew
Find all posts by this user


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication