T3 evolved drift knuckles
07-11-2017, 10:41 PM
Post: #1
T3 evolved drift knuckles
Trying to find out if its possible to fit ae86 coilovers on my carina ta60. So far I've found out that s13 camber plates are 106mm between each bolt instead of the 107mm of a Carina. The problem now is the steering knuckles of my Carina wont bolt up to an ae86 strut.

Reading about the T3 evolved drift knuckles it seems like they would fit almost any combination of old school toyota parts. Anyone used these and can confirm? Also how would these be for street use? My car is already a hassle to drive kinda so would it be horrible and super twitchy or doable?
Find all posts by this user
07-14-2017, 01:24 PM
Post: #2
T3 evolved drift knuckles
"We suggest these knuckles be used for dedicated drift car use only. The benefits built into them are specifically designed for drifting rather than road racing or street use. "

I would not go zero ackerman for the street, the car will most likely drive like shit unless you're sideways all the time Cool
Find all posts by this user
07-14-2017, 05:58 PM
Post: #3
T3 evolved drift knuckles
Get ae86 ps knuckles.

ハチロク

[Image: AEU86 AE86 - T3 evolved drift knuckles]
Find all posts by this user
07-17-2017, 08:05 AM
Post: #4
T3 evolved drift knuckles
(07-14-2017 05:58 PM)zenki Wrote:  Get ae86 ps knuckles.

Not sure they fit the carina LCA though..
Find all posts by this user


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication