ford type 9 gearbox with 4age engine
12-24-2014, 09:25 AM
Post: #21
ford type 9 gearbox with 4age engine
Did anyone ever make a type 9 or borg warner T-5 to 3sg bellhousing?

Andrew
Find all posts by this user
12-24-2014, 11:09 AM (This post was last modified: 12-24-2014 06:41 PM by Uzelac.)
Post: #22
ford type 9 gearbox with 4age engine
(12-23-2014 01:28 AM)filh Wrote:  Uzelac : on Esa Peltonen site :http://www.esapeltonen.fi/ refering to AE86 parts the gearbox is well called Dogbox (3 models).
I already have bought a Type 9 Quaife box , short ratios , straight pinions and synchros

Yes, you are right, i've seen that.
What confuses me now is my gearbox. It should be KL, but it is synchomesh with helical gears and I don't see one like that on their website. Hmm ... Smile
Find all posts by this user
12-25-2014, 11:52 PM
Post: #23
ford type 9 gearbox with 4age engine
dog box are made with straight cut pinions , Quaife made both straight cut pinions, with dog or synchromesh engagement.
Not many details on Espeltonen site , about gearbox (ratios ? historical version?).
The advantage : it's a direct bolt on .
I guess it would be better to email him .
Phil

Filh
Save the RWD cars
Find all posts by this user
12-26-2014, 12:26 AM
Post: #24
ford type 9 gearbox with 4age engine
[Image: AEU86 AE86 - ford type 9 gearbox with 4age engine]

[Image: AEU86 AE86 - ford type 9 gearbox with 4age engine]

[Image: AEU86 AE86 - ford type 9 gearbox with 4age engine]

better pics of Toyota 4A-GE -bellhousing bolted to Ford gearbox with homemade adapter...I think I still have adapter drawings somewhere in my garage...

"Tämmösellä modernilla autolla, niin mun mielestä, ei tämmöstä kisaa voi ajaa. Tää käy kunnon päälle eikä riitä aivot tähän touhuun!"
""With a modern car like this, in my opinion, a competition like this can't be driven. It's too physical and your brains can't cope with this stuff"
-Henri Toivonen 2.5.1986-
http://www.youtube.com/watch?v=OwgB4Xs4LVQ
Visit this user's website Find all posts by this user
12-27-2014, 01:30 AM
Post: #25
ford type 9 gearbox with 4age engine
very nice part

Filh
Save the RWD cars
Find all posts by this user
01-02-2015, 06:13 PM
Post: #26
ford type 9 gearbox with 4age engine
[Image: AEU86 AE86 - ford type 9 gearbox with 4age engine]
It´s not nice drawing, but it helps...thickness is about 22mm.
T=Toyota (threaded holes) F= Ford (straight holes).

Also on bellhousing must make some room for shifter shaft.

"Tämmösellä modernilla autolla, niin mun mielestä, ei tämmöstä kisaa voi ajaa. Tää käy kunnon päälle eikä riitä aivot tähän touhuun!"
""With a modern car like this, in my opinion, a competition like this can't be driven. It's too physical and your brains can't cope with this stuff"
-Henri Toivonen 2.5.1986-
http://www.youtube.com/watch?v=OwgB4Xs4LVQ
Visit this user's website Find all posts by this user
01-04-2015, 12:39 AM
Post: #27
ford type 9 gearbox with 4age engine
Thanks S-K nice drawing, with all measurements.
I've receive the spigot bearing (for Ford type9) but it won't fit the Toyota crank.
what solution did you use ?
Thxs
Phil

Filh
Save the RWD cars
Find all posts by this user
01-04-2015, 03:47 PM (This post was last modified: 01-04-2015 03:47 PM by S.K..)
Post: #28
ford type 9 gearbox with 4age engine
If I remember correct I use a 6902RS (28x15x7) bearing.
Toyota spigot bearing is 6001RS (28x12x8 ) and then measure Ford clutch axle diam. (I think it is a15mm).

"Tämmösellä modernilla autolla, niin mun mielestä, ei tämmöstä kisaa voi ajaa. Tää käy kunnon päälle eikä riitä aivot tähän touhuun!"
""With a modern car like this, in my opinion, a competition like this can't be driven. It's too physical and your brains can't cope with this stuff"
-Henri Toivonen 2.5.1986-
http://www.youtube.com/watch?v=OwgB4Xs4LVQ
Visit this user's website Find all posts by this user
01-04-2015, 08:02 PM
Post: #29
ford type 9 gearbox with 4age engine
many thanks , your measurements looks correct. thanks for your answer , that will help me a lot .
Totta do you have same size for your spigot bearing?
Phil

Filh
Save the RWD cars
Find all posts by this user
01-11-2015, 01:02 PM
Post: #30
ford type 9 gearbox with 4age engine
Spigot bearing problem resolved . Thanks S.K.
Beginnning with Kouki gearbox member, to adapt with Type 9 gearbox mount .
One day , one problem , I hope to get through before first rally ...
Phil

Filh
Save the RWD cars
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  4ac gearbox on 4age hachirokkos 2 3,387 05-24-2016 10:16 PM
Last Post: banpei
  toyota a series engine....can a fwd corolla engine be used 210 datsun guy 5 5,731 10-30-2013 11:18 PM
Last Post: banpei
  7AGE to W58, cluth type? slowboy2 3 3,982 05-25-2013 01:37 PM
Last Post: slowboy2
  Type of carbs to suit 4ag kpretro84 23 15,735 02-09-2013 02:29 AM
Last Post: bakonick
  4age gearbox upgrade Xerius 14 18,640 01-09-2011 12:49 PM
Last Post: Uzelac

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication