extracted freedom ecu 16v ignition map
08-09-2016, 10:53 AM (This post was last modified: 08-09-2016 12:44 PM by ditn.)
Post: #1
extracted freedom ecu 16v ignition map
So i have extracted a 16v ignition map from freedom ecu that was lightly tuned
(Map based)
Do you think this map would be a good starting point for my stock engine with other cams?

[Image: AEU86 AE86 - extracted freedom ecu 16v ignition map]
Find all posts by this user
08-09-2016, 11:38 AM
Post: #2
extracted freedom ecu 16v ignition map
Sure! That is basically "the perfect" starting point! Smile
Find all posts by this user
08-09-2016, 12:38 PM (This post was last modified: 08-09-2016 12:41 PM by ditn.)
Post: #3
extracted freedom ecu 16v ignition map
-.- the first post is now updated
goes from 500 to 9000 rpm other bar is mmgh/kpa

Freedom is bit different than other ecus
Find all posts by this user
08-09-2016, 02:52 PM
Post: #4
extracted freedom ecu 16v ignition map
To be honest, it's an odd looking map.
you got 576 data point (32x18.), but only 200 are really "useful" (20x10)

Appart from that, it should get your engine running.
Find all posts by this user
08-09-2016, 03:10 PM
Post: #5
extracted freedom ecu 16v ignition map
Yeah freedom is a bit different Smile
The rpm points are not changable in the older versions 16 points
For the mmgh you can choose how much it jumps 25 50 ... Intervals
So on an older version it looks weird because injection and ignition use same setting
So youre forced to use same settings and cells for both.

The newer version can sets freely but i have not found out yet

So with those ignitions i can run engine and set fuel cells? Smile
Find all posts by this user
08-09-2016, 05:13 PM
Post: #6
extracted freedom ecu 16v ignition map
If you don't have crazy compression and / or very low octane fuel, yes you're good to roughly tune the fuel table.
Find all posts by this user
08-09-2016, 05:22 PM
Post: #7
extracted freedom ecu 16v ignition map
Stock compression and octane 98 Smile
At least i think engine is like that mystery engine but i dont see anything like tuning.
Will also install knock light from g4.

Thanks for answers Smile
Find all posts by this user
08-22-2016, 10:01 AM (This post was last modified: 08-22-2016 10:15 AM by ditn.)
Post: #8
extracted freedom ecu 16v ignition map
Car is starting and running.
Letting freedom do the autotune on fuel for now.
(Together with afr meter and knock sensor)

Here is another map i made based on 1 from internet,it also has alot less points what do you think :
[Image: AEU86 AE86 - extracted freedom ecu 16v ignition map]
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  AFM to Map Conversion ps13michi 3 2,299 01-06-2022 10:34 AM
Last Post: ps13michi
  Newb question on "how-to" guide for ITBs on JDM 4AG Bluetop w/ MAP mister86 12 9,526 02-10-2020 06:39 PM
Last Post: Power_uP
  20v Silvertop stock ignition timing and fueling maps Lykowsky 5 11,723 07-18-2019 03:52 PM
Last Post: oldeskewltoy
  Freedom ecu users forum totta Crolla 0 3,610 01-20-2016 12:29 PM
Last Post: totta Crolla
  4age 16v oem ecu rev limiter research ditn 18 25,907 06-22-2015 08:02 AM
Last Post: ditn

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication