expirience with mickeymousemade conrods from ebay?
03-12-2014, 02:08 PM
Post: #1
expirience with mickeymousemade conrods from ebay?
Keep comming across these:
http://www.ebay.co.uk/itm/Conrods-Toyota...4ab7509aad

and for the 7AGE builders:
http://www.ebay.co.uk/itm/Toyota-7AFE-co...4ac9efb646

Anyone ever bought some and can tell us if they are allright or just expensive scrap?

1979 Toyota Corolla KE35
1983 Toyota Corolla AE86
1985 Toyota Corolla AE86
Find all posts by this user
03-12-2014, 02:13 PM
Post: #2
expirience with mickeymousemade conrods from ebay?
Personally I would stay well clear of a manufacturer who appears to endorse their product with the name of a potential competitor.
The ARP reference is obvious.

An analogue brain in a digital World
Find all posts by this user
03-18-2014, 06:00 PM
Post: #3
expirience with mickeymousemade conrods from ebay?
totta Crolla Wrote:Personally I would stay well clear of a manufacturer who appears to endorse their product with the name of a potential competitor.
The ARP reference is obvious.

What do you mean by that? Normally all the aftermarket conrod manufacturers sell them with ARP bolts?

1979 Toyota Corolla KE35
1983 Toyota Corolla AE86
1985 Toyota Corolla AE86
Find all posts by this user
03-18-2014, 11:40 PM
Post: #4
expirience with mickeymousemade conrods from ebay?
fax0815 Wrote:
totta Crolla Wrote:Personally I would stay well clear of a manufacturer who appears to endorse their product with the name of a potential competitor.
The ARP reference is obvious.

What do you mean by that? Normally all the aftermarket conrod manufacturers sell them with ARP bolts?

Here is an advert from Arrow engineering and the there is just a mere reference to ARP:
http://www.arrowprecision.com/content/32...cting-rods
Arrow know that their products are good and don't need a 'big' name to help endorse them.
The Chinese rods featured appear to be more about the bolts than the rods themselves and are they even genuine ARP bolts that you get ??

An analogue brain in a digital World
Find all posts by this user
03-19-2014, 10:40 AM
Post: #5
expirience with mickeymousemade conrods from ebay?
Big brands also like to advertise about the bolts.
A good example:
http://www.briancrower.com/makes/toyota/4age_rods.shtml

I can't see the ebay rods but there is enough well known brand rods available on the market to don't have to buy chinese stuff.
Find all posts by this user
03-19-2014, 11:00 AM
Post: #6
expirience with mickeymousemade conrods from ebay?
I guess in this case they are at least telling you they are made in China so you know what to expect.
The market is flooded with Chinese rip offs and if we buy it there will very soon be no place left for the quality stuff we know and can rely on.
http://www.speedtalk.com/forum/viewtopic...=1&t=31096

The other thing to consider is that the standard rods are very robust and an upgrade to steel H section rods is usually done to allow higher revs and if you are going to be running 8500+ rpm then you are going to be building a fairly serious engine.
For a few extra ££ why would you not use a proven product ?

An analogue brain in a digital World
Find all posts by this user
04-11-2014, 01:09 AM
Post: #7
expirience with mickeymousemade conrods from ebay?
My friend has bought a cheap (around 250 Ł )set of rods from ebay around 2008 for his silvertop built rally race engine. It was looking good, and his engine rev'd 9300. It happened that he wanted the exhaust to flame in the night and he did it on the rev limiter for about 5 minutes (!!!) the valve shim fell out one time, but no other problems, and nothing with the rod. I would buy them anytime. And I think I will..

https://www.youtube.com/watch?v=zmdUchnER08
Find all posts by this user
04-11-2014, 01:44 AM
Post: #8
expirience with mickeymousemade conrods from ebay?
ZDoman Wrote:My friend has bought a cheap (around 250 Ł )set of rods from ebay around 2008 for his silvertop built rally race engine. It was looking good, and his engine rev'd 9300. It happened that he wanted the exhaust to flame in the night and he did it on the rev limiter for about 5 minutes (!!!) the valve shim fell out one time, but no other problems, and nothing with the rod. I would buy them anytime. And I think I will..

https://www.youtube.com/watch?v=zmdUchnER08

Ah, that more what I was hoping for, first hand expirience... So its a bit like the chinese turbos, were everyone keept saying they are crap, but people starte using them and, there is actually nothing wrong with them...

1979 Toyota Corolla KE35
1983 Toyota Corolla AE86
1985 Toyota Corolla AE86
Find all posts by this user
04-12-2014, 11:17 AM
Post: #9
expirience with mickeymousemade conrods from ebay?
Chinese turbos I would't buy! Big Grin
Find all posts by this user
04-18-2014, 07:26 AM
Post: #10
expirience with mickeymousemade conrods from ebay?
ZDoman Wrote:My friend has bought a cheap (around 250 Ł )set of rods from ebay around 2008 for his silvertop built rally race engine. It was looking good, and his engine rev'd 9300. It happened that he wanted the exhaust to flame in the night and he did it on the rev limiter for about 5 minutes (!!!) the valve shim fell out one time, but no other problems, and nothing with the rod. I would buy them anytime. And I think I will..

https://www.youtube.com/watch?v=zmdUchnER08

Hahahahah! ( Banging head )
Visit this user's website Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  20V Blacktop ConRods 86Pilot 18 20,803 02-21-2012 07:40 PM
Last Post: Jimmi The Kid
  Forged conrods Roku_trueno 11 9,966 06-13-2008 08:01 PM
Last Post: F0Bman

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication