Under shim bucket kit qustion
04-21-2009, 12:27 PM
Post: #11
Under shim bucket kit qustion
I can see the TRD N2 uses 304' with 10,0mm lift on the intake and 272' 288' 300' and 304' with 10mm lift on the exhaust.

I think I will go for a set of 304' 10mm lift on both intake and exhaust. I know one who use the same setup on his smallport and it produce about 200hp @ crank at only 9000rpm.
I don't wanna build a really high revving engine, as the revs will kill it in a few time. Otherwise, I could buy the old Atlantic engine I was offered, but I dont wanna rebuild it every 2500km and it for sure not good for the street. The price is also a bit too much :wink:

Project AE86 now begun.

Cars I have owned:
Toyota Starlet EP91 1,3 16v Turbo, 200hp
Toyota Starlet EP71 1,3 12v Sport
Mercedes 207D camper, 1977.
Toyota Starlet EP70 with a 174hp Silvertop 20v See video here:
http://videos.streetfire.net/search/Star...079edc.htm
Toyota Corolla AE101 with a 164hp Silvertop 20v. (Evolution bodykit and candycolor paint).
Volvo 240 2,1 (The only car I have maked money on).
Toyota Corolla EE90 (my first car)
Find all posts by this user
05-11-2009, 01:57 AM
Post: #12
Under shim bucket kit qustion
What springs beside HKS and TODA ? And of course TRD which I can't even goo look how much they cost Smile.

Are HKS good for 10mm lift ?

What about stories that some Supra/Celica valves can be used ?

Does anyone know what diameter/lenght/rate TODA/TRD/HKS valve springs are and help search for alternative solution ?

Thanks
Find all posts by this user
07-08-2009, 04:04 PM
Post: #13
Under shim bucket kit qustion
catcams.be (use IE doesn't work properly with Firefox or others) do springs as well ~8 Euro per spring (E99862 good for up to 11.5mm lift)

AE86 ex-daily
Visit this user's website Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Bucket seat prices gh0st 5 1,938 01-23-2022 11:44 PM
Last Post: AlexKTM
  Downpipe + exhaust under 102 db DidiDex 1 3,363 09-12-2019 10:45 PM
Last Post: Bean
  20V shim micrometer oldeskewltoy 7 8,160 12-22-2017 12:23 AM
Last Post: Project D
  Shim size for AM cams kazi 4 4,520 12-18-2017 05:34 PM
Last Post: oldeskewltoy
  4A-GE Shim where to buy megabob 12 11,530 01-11-2012 12:57 AM
Last Post: ZDoman

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication