Torque
01-04-2005, 09:13 PM
Post: #1
Torque
Can you get 180+NM from a 4ag engine? Or what is the max without going FI?

And what mods would you need?
Find all posts by this user
01-04-2005, 11:04 PM
Post: #2
Torque
I doubt it...that's 2 liter territory.
An english fellow on club4ag is claiming such numbers, but I havent seen the dyno sheet so I dont really believe it.

FABRICA MI DIEM, PVNC!
Visit this user's website Find all posts by this user
01-05-2005, 12:59 AM
Post: #3
Torque
180 nm from a 4age turbo it :-) without FI hmmz

standard should be around 130-140nm so you should be able to get it up to 160 max i think

if you

bore it to 82mm
3xx cams

etc

will be one hell of an engine but way to expensive better take 4agze then

Cars:
"99 Lexus IS200
"86 AE86 Kouki Panda Levin GT-Apex (restore project)
"84 AE86 Zenki Blue Levin (project racer)
Motorcycles:
"02 Yamaha R1
"02 Honda Hornet S
"08 BMW R1200GS
Find all posts by this user
01-05-2005, 12:54 PM
Post: #4
Torque
You can get 190Nm - take a look at 4AGE engines for rallying.
I think - the major factor here was higher CR - ~11 and more.
Visit this user's website Find all posts by this user
01-05-2005, 02:04 PM
Post: #5
Torque
Can you get that amount of torque in the lower rev range or only from 5k and up? Because most race engines have no torque down low.
Find all posts by this user
01-05-2005, 02:06 PM
Post: #6
Torque
Now way to get low RPM torque with NA race engine :-(
Visit this user's website Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Torque settings kazi 4 5,312 03-28-2017 12:15 AM
Last Post: kazi
  torque setting head cylinder bolts izanagi 1 4,453 05-29-2015 01:23 AM
Last Post: oldeskewltoy
  Need help finding an axle that can handle high hp/torque kevcov 5 6,074 04-17-2011 10:50 AM
Last Post: Prime86
  4AGE Silvertop torque setting christsang7 3 15,963 07-31-2009 06:12 AM
Last Post: christsang7
  T50 G/box tightening torque question. misterforager 2 5,197 04-20-2009 01:41 AM
Last Post: apardal

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication