Paradise Racing clutch (6puk) with stock pressure plate
05-02-2007, 05:15 PM
Post: #1
Paradise Racing clutch (6puk) with stock pressure plate
Has anyone ever ride with this setup? I'm installing a Paradise Racing clutch (6 puk, sprung) in a stock (almost new with 10k miles on it) clutch cover - pressure plate.

I also have a TODA light flywheel.

I'm using it for street and track. Let me know your thoughts...

Thank you
Find all posts by this user
05-02-2007, 06:35 PM
Post: #2
Paradise Racing clutch (6puk) with stock pressure plate
not enough face pressure...

Ideally you want to increase the clamping load on the disc BEFORE you go to racing, or semi racing discs. Doing it your way will only boost holding power minimally... if at all. Get a HD pressure plate and you'll be doing better...

Dan -

You can |Sad .... OR you can ask for help!!!

OST Porting service - http://hachiroku.net/forums/showthread.php?t=19991
Find all posts by this user
05-03-2007, 12:35 AM
Post: #3
Paradise Racing clutch (6puk) with stock pressure plate
But have you tried it?

I would like to have references from people who had experienced it.

(not that your statement isn't valid, it seems more than correct)

Best regards
Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  Mocal oil cooler & sandwitch plate ordered Gtsi-R 48 50,840 11-18-2022 02:19 PM
Last Post: FanIsHere
  Digital speedometer on stock dashboard FanIsHere 0 919 11-09-2022 01:36 PM
Last Post: FanIsHere
  82mm Stock compression Pistons apardal 4 2,170 11-24-2021 04:26 PM
Last Post: apardal
  20v Silvertop stock ignition timing and fueling maps Lykowsky 5 11,723 07-18-2019 03:52 PM
Last Post: oldeskewltoy
  Most stock-resembling exhaust for the AE86? DaLanZhu 4 4,828 03-24-2019 04:10 PM
Last Post: oldeskewltoy

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication