OST-068: Smok'n

[oldeskewltoy]

so... its been a while since I've updated... build is almost finished, just waiting on the new Cometic .036" 20V gasket.





old, and dirty, and look at the pock marks in the exhaust seats

Quote:

port work complete - prior to valve job - exhaust seats still pock marked if you look closely




4 angle(exhaust), along with ground valves with back cut intakes



a bit closer view





Head is ready for re-assembled using Supertech springs




and as always... it requires small tools (tweezers required)






the bottom end got oversize(81.5mm) pistons, and a complete re-balance




along with a new MRP oil pan




more to come......