My little (not really...) project - Soon to be all done?!?
06-19-2012, 07:48 PM
Post: #491
My little (not really...) project - Soon to be all done?!?
It seems that the input shaft will be too short and the splines won't reach the clutch...

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Visit this user's website Find all posts by this user
06-20-2012, 06:11 AM
Post: #492
My little (not really...) project - Soon to be all done?!?
you'll need to get off some mm at the front and at the rear of the BH to match the thick of the plate

SR Team
BURN THE RUBER NOT YOUR SOUL!
Find all posts by this user
06-20-2012, 04:13 PM
Post: #493
My little (not really...) project - Soon to be all done?!?
BOOMEX Wrote:you'll need to get off some mm at the front and at the rear of the BH to match the thick of the plate
The shaft it selfe is 5 mm shorter than on the T50. and you kan mil off 5 mm at most at the front of the AZ6 and none at the rear as it houses the front bearings.

It is possible on a RS200 / 3SGE AZ6. The bell house barely fits the tunnel but its possible. My friend Martin just finished this swap :wink:

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Visit this user's website Find all posts by this user
06-20-2012, 05:43 PM
Post: #494
My little (not really...) project - Soon to be all done?!?
or just do extension to crank bearing. OR some friends have put wider bearing just and its fit.
Find all posts by this user
06-24-2012, 10:17 AM
Post: #495
My little (not really...) project - Soon to be all done?!?
Cutting the 10 mm plate was a bitch:
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Now we just need to have the parts welded:
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]

To do:
Welding
Finding a clutch cylinder that will fit
Custom cross member
Custom drive shaft
Speedo drive
Mounting AZ6
Beat the h*** out of it Big Grin

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Visit this user's website Find all posts by this user
06-24-2012, 11:32 AM
Post: #496
My little (not really...) project - Soon to be all done?!?
How are you going to get the the shaft and the engine axed?

SR Team
BURN THE RUBER NOT YOUR SOUL!
Find all posts by this user
06-24-2012, 12:53 PM
Post: #497
My little (not really...) project - Soon to be all done?!?
We made a fixture that bolts to the T50 BH with a hole for the shaft.

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Visit this user's website Find all posts by this user
06-24-2012, 01:25 PM
Post: #498
My little (not really...) project - Soon to be all done?!?
Jan Pedersen Wrote:We made a fixture that bolts to the T50 BH with a hole for the shaft.

Cool. Thumbs up!

I'm thinking about doing the same thing Wink

SR Team
BURN THE RUBER NOT YOUR SOUL!
Find all posts by this user
07-02-2012, 06:27 PM
Post: #499
My little (not really...) project - Soon to be all done?!?
AZ6 for 4AGE:
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]

Speedo drive from a W5x:
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
T50 clutch fork:
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]

Shifter relocation part I:
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Still needs some welding and a bracket for the T50 shifter...

And its finally mounted:
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
It just fits with lower engine mounts Hurray!

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Visit this user's website Find all posts by this user
07-02-2012, 06:30 PM
Post: #500
My little (not really...) project - Soon to be all done?!?
BOOMEX Wrote:
Jan Pedersen Wrote:We made a fixture that bolts to the T50 BH with a hole for the shaft.

Cool. Thumbs up!

I'm thinking about doing the same thing Wink
Do it! Its awesome Hurray!

Sarcasme is just one of the things I offer Wink

Daily driver: '92 Toyota Carina E GTI
Rebuilt project: '86 Levin hatch
[Image: AEU86 AE86 - My little (not really...) p...ll done?!?]
Visit this user's website Find all posts by this user


Possibly Related Threads...
Thread Author Replies Views Last Post
  (Catching up...) OST-082: Nope, never again... at least not without all the parts oldeskewltoy 0 1,187 06-28-2022 09:17 PM
Last Post: oldeskewltoy
  OST-066: I get all wavy (4AC content) oldeskewltoy 10 11,372 04-03-2020 04:29 PM
Last Post: Power_uP
  d3nso's little AE86 N2 build d3nso 27 32,315 11-13-2017 11:42 AM
Last Post: mad.matt
  Doc's KE20: - really coming together now The Doctor 548 478,751 08-03-2011 11:57 AM
Last Post: The Doctor
  NZ AE85 - soon to be BEAMS powered Hachi Go 46 68,493 06-24-2011 10:12 PM
Last Post: [Walaki]D`Lair

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication