My Tuned AE86 project
09-12-2009, 02:41 PM
Post: #21
My Tuned AE86 project
So how do you fit the gearbox??? Well, I took another route and decided to get an engine for it since it was lonely. Yummie!

Picked up my new engine today - who says you can't fit a SR in an 86? :o

[Image: AEU86 AE86 - My Tuned AE86 project]

For those who don't know, this is a SR16VE.

86mm bore, 68.7mm stroke
rod ratio of 2.11 ([email protected])
11:1 compression ratio
200/280 camshafts (low/high camlobe)
~175hp Nissan rated
~130kg

More images
[Image: AEU86 AE86 - My Tuned AE86 project]

Ports look good - although not downdraft it seems similar to a smallport somewhat.
[Image: AEU86 AE86 - My Tuned AE86 project]

[Image: AEU86 AE86 - My Tuned AE86 project]

VE port is tad bigger than a smallport
[Image: AEU86 AE86 - My Tuned AE86 project]

Makes you wonder what they were thinking with the BIGport.
[Image: AEU86 AE86 - My Tuned AE86 project]
Find all posts by this user
06-26-2010, 09:30 PM
Post: #22
My Tuned AE86 project
anything happening with this build?

The AZ6 swap is very interesting! Yummie!

Patrick - MFactory Competition Products
THE Replacement for Displacement!
-- http://www.teammfactory.com --
Visit this user's website Find all posts by this user
07-04-2010, 01:54 PM
Post: #23
My Tuned AE86 project
Unfortunately been busy building a house to take on any major project. At the moment its just s2000 cluster and 20v conversion Sad Also just hording some nissan parts in the meantime.

Once I move my gear over to the new garage I can begin to make a new mess.
Find all posts by this user


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | AEU86 | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication