KONI YELLOW´s - fitting / adjusting info

[KristianAE86]

KONI YELLOW´s - fitting / adjusting info

[KristianAE86]

part 2

[Mux213]

Damn,its hard to see detail on those scans, can you email me higher resolution?

[Widar]

mux213 Wrote:Damn,its hard to see detail on those scans, can you email me higher resolution?

no email, put them up here!
I want better res. too!

[robokill]

hmmz its not hard

to adjust a koni

press it in full to the buttom than you can turn it left or right

tighten or losen it.

When you tighten it the bound rate will be minimized. So simple bring it down till the button than you can turn it .

Best way in my exp is to turn it full.. than losen it for 1/4 turn.

[Jeroen]

robokill Wrote:Best way in my exp is to turn it full.. than losen it for 1/4 turn.

That´s the official way

[Mux213]

Ah I finally did my rear konis!!

Lift one side of the car up but dont lift wheel off the ground

Unbold koni at the top

Compress fully

then turn to adjust, they have 2.25 turn side to side, no clicks, fully adjustable.

Also contrary to what people have told me, these STIFFEN clockwise and LOOSEN anti-clockwise when being adjusted like this (depends which way you look at it really). I put them on 1.75 stiff, they where at 0.25

I haven't had time to take her for a real spin but on the drive from the garage back home she felt alot more steady! I think I'm gonne be very happy with this change

Fronts I'll do later, need to get my coilovers in first.

[Ivan141]

Nice work...I'm sure it will make a lot of difference.

[robokill]

the koni that are off my car i have adjustet already just have to apply them to the car...