Hydraulic handbrake

[205t16]

i have one of hese waiting to go into my ae86 but ive never fitted one before, could some explain to me where to connect to and what type of fittings to use, i have copper brake pipe also.

[banpei]

Hope this can help:
http://www.aeu86.org/Writeup/Brakesystem...index.html
It doesn't say anything about the fittings though.

[205t16]

i kinda wanted something a bit more informative with exact locations specified or shown but thanks anyway, anyone else help out.

[S.K.]

Here is a picture, this is a way the pipes go
http://s33.photobucket.com/albums/d61/Kl...h=imgAnch1

http://s33.photobucket.com/albums/d61/Kl...h=imgAnch2

cylinder "bolts" are 7/16" UNF and 3/8" UNF.

[CircuitFreak]

Here is a pic from my TRD Corolla levin Sprinter Trueno Special Edition Bible.
Maybe this can help you.
I also got a hydro handbrake that i still need to put in the car.
I think this is the best way to do it.

[Ivan141]

ehm...dual master cilinders isnt exactly a simple install to do..

[banpei]

Added pics as attachments.

[jamiemirror]

Also I see some kind of one-way dual valve in rear brake hydraulic circuit (maybe this way interference between hand and pedal braking is avoided).
What if you just add another set of rear calipers + independent hydraulic circuit for hand brake ?

[Eircamae86]

Keep the existing cable set up & just buy a kit from any rally shop, which includes the cylinder, this is better for mots as you need a physical cable attachment

[meshin]

jamiemirror Wrote:Also I see some kind of one-way dual valve in rear brake hydraulic circuit (maybe this way interference between hand and pedal braking is avoided).

I'we heard on DIY hidraulic handbrake it likes to overflow the master cilinder when you pull the handbrake.